Top 10 Best Sig Romeo

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger Security 9 Pistol by Replacing the Rear Sight with this Optic Mounting Plate.. Attention This Ruger Security 9 optic plate does NOT fit Ruger SR9 pistol. Ruger SR9 and Ruger Security 9 are completely two different pistols. Torque screw to 15inchlb. For gun glue, we recommend to use loctite treadlocker. This plate fits Vortex ViperVenom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012and Pro,RD3-015and Pro, RD3-028, RD3-018 Spike, , DocterNoblex Sight C, DocterNoblex sight 2, DocterNoblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.. Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 120.. Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longershorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. This is a PICATINNY rail mount. The red dot optic MUST equipped with a PICATINNY BASE in order to attach to this riser mount.. Some of the red dots comes with picatinny plate with the red dot purchase, such as Vortex Venom and Burris Fastfire. This Picanny riser will fit the red dot factory provided original pictainny plate.. Some of the red dots do NOT come with picatinny plate with the red dot purchase, such as holosun 407k. User need to purchase the picatinny plate separately in order to attach to this riser mount.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Precision CNC Machined from Aircraft Grade Aluminum. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel red dot sights. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k in March 2022. Finished in a Matte Black Anodize. Comes with two screws.

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off. Comes with a picatinny mounting base. It is also compatible with varies handgun mounting platesSOLD SEPARATELY that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plateSOLD SEPARATELY.. This GREEN dot fits directly on Glock MOS system with the 1 mount that comes with MOS without needing to remove the rear sight. This glock MOS 01 plate need to obtain from glock, not included in this green dot purchase.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.. GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. While it is possible to install the optic to handgun without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. ADE RD3-006B, RD3-009, RD3-012, and RD3-013 fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa fit optic cutplate that is compatible with Shield RMSRMSCLeopold Deltapoint ProSig Romeo Zero footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2 fit optic cutoptic plate that is compatible with Trijicon RMR HS407CHS507CHS508T footprint.

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Ships with co-witness 1.41in riser mount pre-installed. Download the instruction manual not included in package.

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

Sig Sauer Romeo 7, Sight, 1X30mm, Fits M1913 Rail, GraphiteFinish, Full Size, 2 MOA Red Dot, 0.5MOA Adjustments SOR71001.

Dependable IPX-7 Waterproof and Fogproof Performance. Lens Caps Included - MAGNIFICATION 1X by 3X. OBJECTIVE LENS DIAMETER 20 millimeter ROMEO MSR 22 millimeter JULIET3 MICRO. RETICLE 2 MOA DOT - FIELD OF VIEW 7.4. EYE RELIEF 65 millimeter - EXIT PUPIL 7 millimeter - ILLUMINATION 10 DAY 2 NV. WATERPROOF IPX-7.

HIGH PERFORMANCE - Robust, compact ROMEO5XDR red dot sight with 50,000 hour battery life paired with the ultra-compact and lightweight JULIET5-Micro 5X magnifier is the best choice for avid shooters These electro-optics gun stock accessories ensure a lifetime of reliable service. ROMEO5XDR SIGHT - The XDR in ROMEO5XDR stands for Extended Dot Range, indicating an expanded illumination setting for the 2 MOA red dot reticle can be toggled between a 2 MOA dot or a 65 MOA circle dot reticle This allows users to adapt the brightness level according to different lighting conditions, ensuring optimal visibility in various environments. VERSATILE APPLICATIONS - With its 1x magnification, the ROMEO5XDR is a versatile sight suitable for a wide range of applications, including rapid target acquisition on shotguns, and even certain handguns Its compact design makes it well-suited for both tactical and sporting use. JULIET5-MICRO 5X MAGNIFIER - The Juliet5-Micro Magnifier features high-performance lens coatings, including a dielectric-coated prism, which ensures excellent light transmission This translates to a clear and bright sight picture, providing the shooter with enhanced clarity in various lighting conditions. CONVENIENT IN USE - The magnifier is equipped with a 90-degree push-button flip-to-side mount, allowing the shooter to quickly transition between magnified and non-magnified views With dependable waterproof and fog-proof performance, the Juliet5-Micro maintains optical clarity even in adverse weather conditions.

Proofs impact resistant. Reticle 6 MOA dot. Series reflex sight. Wind age elevation 120 MOA.

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. Weapons grade ultra lite polymer housing, optimized for use with polymer pistols, concealed-carry and also slim slide profiles. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. Motac motion activated illumination system that powers up when it senses motion and powers down when it does not. Sport type Airsoft.

-2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. -MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. -Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. -Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance.

DURABLE CONSTRUCTION - The ROMEO-X PRO, inspired by the MIL-SPEC ROMEO-M17, features a rugged CNC Machined 7075 Aluminum Housing, meeting military standards for reliability and performance, ensuring robustness to withstand challenging conditions Suited for the optic ready P320, P226 P229 Family of pistols Designed with an RX Footprint compatible with DeltaPoint Pro mounts, it ensures a secure fit on various pistols. HIGH-QUALITY OPTICAL COMPONENTS - Equipped with a Distortion-Free Aspherical Lens, the ROMEO-X PRO open reflex sight from SIG SAUER delivers a clear and distortion-free sight picture for enhanced accuracy The use of quality optical components ensures optimal light transmission and clarity in various shooting conditions. ENHANCED PERFORMANCE - The ROMEO-X PRO is equipped with an innovative ultra-low deck height that allows for seamless co-witnessing with standard-height iron sights Additionally, it integrates a patent-pending Beryllium Copper Flexure Arm, enhancing durability and ensuring reliable performance under demanding conditions. VERSATILE RETICLE OPTIONS - This ROMEO-X PRO features a Circle Dot reticle with individually selectable 2 MOA Dot 32 MOA Circle, providing versatility for different shooting scenarios Shooters can customize their reticle based on precision needs or quick target acquisition, enhancing adaptability in the field. CONVENIENT IN USE - ROMEO-X PRO incorporates intuitive adjustment buttons and a side-mounted power unit compartment for easy access With 20,000 hours of run time and MOTAC technology, it conserves power by activatingdeactivating illumination based on motion The sight offers 15 illumination settings 12 DL 3 NV, providing users with flexibility in adapting the reticle brightness to different lighting conditions.