Top 10 Best Sig Sauer Red Dot Sight

Comes with mounting plate that replaces the rear sight dovetail of Sig P226, P2022 and also a standard picatinny mount. The plate does NOT fits other Sig models such as P320 and P360. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slidefootprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.. 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer STANDARD P320 Handgun. The P320 Plate that comes with this listing Only fits standard P320. It does NOT fit special edition like XCarry, X-5, XCompact and M17. Huracan RD3-006 Green Dot Reflex Sight. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.. ShockFog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount.

Sig Sauer Romeo5 Compact Red Dot Sight - SOR52010.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Ships with co-witness 1.41in riser mount pre-installed. Download the instruction manual not included in package.

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. Weapons grade ultra lite polymer housing, optimized for use with polymer pistols, concealed-carry and also slim slide profiles. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. Motac motion activated illumination system that powers up when it senses motion and powers down when it does not. Sport type Airsoft.

HIGH PERFORMANCE - Robust, compact ROMEO5XDR red dot sight with 50,000 hour battery life paired with the ultra-compact and lightweight JULIET5-Micro 5X magnifier is the best choice for avid shooters These electro-optics gun stock accessories ensure a lifetime of reliable service. ROMEO5XDR SIGHT - The XDR in ROMEO5XDR stands for Extended Dot Range, indicating an expanded illumination setting for the 2 MOA red dot reticle can be toggled between a 2 MOA dot or a 65 MOA circle dot reticle This allows users to adapt the brightness level according to different lighting conditions, ensuring optimal visibility in various environments. VERSATILE APPLICATIONS - With its 1x magnification, the ROMEO5XDR is a versatile sight suitable for a wide range of applications, including rapid target acquisition on shotguns, and even certain handguns Its compact design makes it well-suited for both tactical and sporting use. JULIET5-MICRO 5X MAGNIFIER - The Juliet5-Micro Magnifier features high-performance lens coatings, including a dielectric-coated prism, which ensures excellent light transmission This translates to a clear and bright sight picture, providing the shooter with enhanced clarity in various lighting conditions. CONVENIENT IN USE - The magnifier is equipped with a 90-degree push-button flip-to-side mount, allowing the shooter to quickly transition between magnified and non-magnified views With dependable waterproof and fog-proof performance, the Juliet5-Micro maintains optical clarity even in adverse weather conditions.

IN THE BOX 1 x SlG Sauer Airgun Red Dot Optic Reflex Sight AIR-REFLEXSIGHT. Works with Optics Ready SIG AIR P320 Airgun and Airsoft Platforms, Including the M17M18. ElevationWindage Adjustments and 6 Level Intensity Control. The sight features lightweight aluminum housing and shock-proof design ensure durability. Easy to install. Included Components CR2032 Battery, 2 mounting plates.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 50,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41 riser mount.

DURABLE CONSTRUCTION - The ROMEO-X COMPACT, inspired by the MIL-SPEC ROMEO-M17, features a rugged CNC Machined 7075 Aluminum Housing, meeting military standards for reliability and performance, ensuring robustness to withstand challenging conditions Suited for the optic ready P365 Family of pistols Designed with RX footprint compatible with Shield RMS-c mounts, ensuring secure and versatile installation on compact pistols. HIGH-QUALITY OPTICAL COMPONENTS - Equipped with a Distortion-Free Aspherical Lens, the ROMEO-X COMPACT open reflex sight from SIG SAUER delivers a clear and distortion-free sight picture for enhanced accuracy The use of quality optical components ensures optimal light transmission and clarity in various shooting conditions. ENHANCED PERFORMANCE - The ROMEO-X COMPACT is equipped with an innovative ultra-low deck height that allows for seamless co-witnessing with standard-height iron sights Additionally, it integrates a patent-pending Beryllium Copper Flexure Arm, enhancing durability and ensuring reliable performance under demanding conditions. VERSATILE RETICLE OPTIONS - This ROMEO-X COMPACT features a Circle Dot reticle with individually selectable 2 MOA Dot 32 MOA Circle, providing versatility for different shooting scenarios Shooters can customize their reticle based on precision needs or quick target acquisition, enhancing adaptability in the field. CONVENIENT IN USE - ROMEO-X COMPACT incorporates intuitive adjustment buttons and a side-mounted power unit compartment for easy access With 20,000 hours of run time and MOTAC technology, it conserves power by activatingdeactivating illumination based on motion The sight offers 15 illumination settings 12 DL 3 NV, providing users with flexibility in adapting the reticle brightness to different lighting conditions.

Package length 9.1 cm. Package width 19.7 cm. Package height 22.6 cm. Product Type SPORTING GOODS.