Top 10 Best Sightmark Mini Shot

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.. Fits Vortex Venom Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Also Fits Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMRSRO type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red Dot Sights.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

100 waterproof and dustproof. Up to 30, 000 hour Battery life on lowest setting. Steel protective shield. 3 MOA Red dot reticle. 10 reticle brightness levels and 2 night vision brightness settings.

PINPOINT ACCURACY The FastFire III puts an unmistakable red dot at the point of impact within your field of view, giving you an immediate advantage in speed and accuracy.. LIGHTWEIGHT OPTICS With lightweight construction and durable design, the FastFire III can be used as a primary sight or paired on top of an existing sight.. VERSATILITY DEFINED Rely on the automatic brightness sensor to adjust to match the environmental conditions or choose one of the three manual brightness settings.. RED DOT SIGHT Choose a 3 MOA dot, popular on rifles or with anyone wanting more pinpoint accuracy, or choose the 8 MOA dot, which is ideal for short range shooters and fast acquisition. Windage adjustment 86 MOA. MUST-HAVE COMPETITION GEAR The FastFire III will work with virtually all optics-ready handguns, making it a convenient part of your competitive shooting system. Shockproof design stands up to years of punishing recoil. 3 MOA Dot Reticle. Tool-less wind age and elevation adjustments. Top of sight battery access. Convenient power button with three levels of brightness and an automatic brightness setting. Low battery warning indicator.

Compact, lightweight aluminum alloy housing. Protective aluminum shield. Fixed picatinny mount. Wide lens provides quick target acquisition. Slotted windage and elevation adjustments.

Precision accuracy. Precision multi-coated optics. Perfect for rapid fire or moving target shooting. Single reticle, 3 MOA dot.

Matte Black Finish. Picatinny style mount. Lightweight aluminum material. Included components Adjustment tool.

Extremely low power consumption. Windage and elevation click adjustments. 10 reticle brightness levels. 100 waterproof and dustproof and Steel protective shield. Ambidextrous digital switch brightness controls.

Versatile Optic The Sightmark Mini Shot A-Spec M3 is designed for home defense and short-to-mid range shooting, compatible with pistols featuring a Shield RMS-C footprint, and equipped with a red auto-brightness control reticle for day or night use.. Co-Witness Capability Allows for co-witnessing with standard pistol sights, enhancing target acquisition and accuracy.. Extended Battery Life Offers an impressive battery life of up to 100,000 hours, ensuring long-lasting performance and reliability.. Rugged and Weather-Resistant Constructed from durable aluminum alloy with an IP55 water-resistant rating, this optic can withstand rough handling, resist water ingress, and operate in temperatures ranging from -22F to 122F.. Complete Package The A-Spec M3 comes with essential accessories, including a rubber cover, low-profile fixed mount, and a manual, providing users with a comprehensive solution for their shooting needs..

8x digital zoom 10 reticle options with 9 colors with 1080P HD digital imaging. Daytime color mode and night vision mode with a flip of a switch. Fixed picatinny mount type with additional weaver rail for accessories. Built-in HD video recording powered by 4 AA batteries with a runtime of 4.5 hours. Bundle includes Wraith Scope, cleaning cloth, 4 AA batteries, Battery Case, and Lumintrail Cleaning Cloth.

Includes IR850-NS Accessory IR. Call for mounting advice 800 444-5994. Range 100-200 yds. in typical nighttime environments. High resolution, 640X480 display. For use with rifles up to 30 caliber.

3840P 4K Digital Imaging with built in 4K video and audio recording. 8x digital zoom and 14 reticle option with 9 colors 10 second focal point reticles and 4 first focal point reticles. Daytime color mode and night vision mode. Power Input. 5 profile saves.