Top 10 Best Smallrig 2176b

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

Compatibility Compatible with two cables at the same time Maximum Capacity 2 cables with diameter of 6mm. Install Method The cable clamp is fixed to the cage, handle, L plate, and other accessories by 14 screws, and accommodate cable such as HDMI cable, microphone cable, charging cable, shutter cable, USB cable and headphone cable, etc.. Quick Installation Designed with space on the surface, the wrench can pass through the clamp to install or remove 14 screws, and then quickly install or remove the clamp. Easy To Use the spring cover is tight, and the cable can be installed by opening the cover, which is convenient and quick. Product Advantages keep the wire tidy, prevent accidental disconnection of the signal, and protect the wire port.

This 1.5 rod can serve as 15 mm quick release mount for adapting anything that requires a male or female 14 20 connection. It is often used in conjunction with a clamp Mount not included or CheesePlate not included.. 14-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting and many other accessories. A 15 mm micro rod with 1.5 total length 38 mm --- comes with 14-20 male thread on top ,14-20 female thread at bottom.. Stainless Steel Screw..

MUST-HAVE FOR PHONE PHOTOGRAPHYThe smartphone that you have in your pocket is already an extremely powerful production tool that you can use to capture lifes greatest memories and editshare them instantly. Smartphone video rig 2791 is designed to expand the shooting capabilities of your smartphone and to provide more mounting options for filmmakers, YouTubers, and vloggers. UNIVERSAL STABILIZER WITH WIDE JAWSFeatured with a secure screw lock design for quick grip and release of phones from 2.6-3.4 67 to 86mm wide, and it fits most smartphones on the market For iPhone 1313 Pro13 Pro Max1212 Pro12 Pro Max, for Galaxy S20 5GS20 Ultra 5GS20 5G, for Huawei P40P40 Pro.. ONE DEVICES ENDLESS POSSIBILITIESThe smartphone cage comes with multiple 14''-20 threaded holes and two cold shoes for attaching a tripod, LED light, microphone, etc. Multiple 14 threaded holes can be used to attach SmallRig tripod 3033, side handle HSS2424, video light P96, microphone 3453. PREMIUM PROTECTION FOR YOUR PHONEThe smartphone video rig is made of aluminum alloy to be lightweight yet sturdier. Besides, the built-in rubber pads on the bottom ensure the smartphone in place and away from scratching. Two cable ties are attached, which can be used to sort out the messy data cord and microphone cord during the shooting. FORGET SHAKY VIDEOSHold both sides of the handle can easily keep the cellphone balance and greatly reduces shake, comfortable and balanced in your hands. Both vertically and horizontally Mount it onto ANY Tripod, Slider, Stabilizer or Dolly with 14 screws to take higher Quality videos.

FOR POWER BANK SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required.. SPRING LOADED CLAMP The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 87mm, which covers most products in the market.. RUBBER CUSHIONS The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching.. MOUNTING POINTS On the top, bottom and back of the holder, there are multiple 14 threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages.. LIGHTWEIGHT AND DURABLE The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around..

Double head 14 male screw Since both ends are 14 male screw, it could be used on most accessories with the 14-20 thread.. Multi-functional, can be used with tripods, monopods, telescopes, ball heads, lens collars, lens plates etc.. Made of high quality stainless steel, it is light-weight and durable.. Recommended for those who frequently reconfigure equipment. It is the optimum equipment for photographersmovie makers.. Size Length 20mm, approx. Diameter 16mm.Please note that the screws are with SmallRig LOGO on them.

SmallRig Super Lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock.. Each Super Lightweight 15mm-Railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts.. The adjustment of one wingnut will not affect the operation of the other wingnut.. In addition, it is equipped with an abundance of 14 threaded holes for DIY operations..