Top 10 Best Smallrig 3594

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

FOR BMPCC 4K CAGEA baseplate specially designed for SMALLRIG BMPCC 4K 6K cage 22032254. Secured in place with one wingnut and a security knob notch preventing the baseplate from accidentally sliding off. FOR MANFROTTO STYLEFeatures a quick release plate for Manfrotto 501PL standard and a receiver on the top, allow you to quickly assemble and disassemble. Besides, the quick release plate could be removed to mount onto the tripod that works with Manfrotto 501PL. 15mm ROD CLAMPFeatures 15mm dual rod clamp and provides a 15mm rail support at 85mm rod height. You can attach the matte box, follow focus, SMALLRIG lens support 2152, and SMALLRIG 15mm Rod 1053 to finish a shoulder support system, etc.. DOVETAIL FOR ARRI STYLEComes with an integrated dovetail for ARRI standard on the bottom that could be mounted with SMALLRIG Dovetail Plate 1463. MOUNTING POINTSThis baseplate features 14 and 38 thread holes on the bottom, which help adapt the plate for use as other plates compatible with Manfrotto, Sachtler standard, etc..

Two in One Table MountThe extendable desk mount is equipped with one 14 ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work.. Height AdjustabelThe desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 13-33 35.4cm-90cm, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier.. 360 Swivel BallheadThe ballhead with top 14 screw ensures 360 panoramic rotation for panoramic shooting, -9045 front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The maximum load capacity is up to 6.6 pounds3kg.. Desk Light Mount ClampThe camera mount is adjustable for fitting different tables through adjusting the knob at the bottom, suitable for the table thickness up to 5cm 2. Save your space than the light tripod.. Tough DurableMade of aviation aluminum alloy material, with the strong tube diameter 22-25mm, it is more durable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint. Weights only 15oz 430g, easily to carry around with you..

Original Nespresso Aeroccino 3 lid for Aeroccino 3 only for model 3593 or 3594. Attention Not fit in Aeroccino 3 model 3194 or 3193. Please confirm your model before order the lid..

Why You Need You have a camera for Sony A7 SIII A7 IV, and the camera cage 2999 3241 3667 3639 3594. Also, you want to mount the FX30 FX3 XLR handle on the camera. Then the mounting plate MD4019 will help you make the handle more stable on the camera.. For Sony FX30 FX3 XLR Handle The plate attaches to the FX30 FX3 XLR handle via two 14 threaded holes.. For Sony A7 SIII A7 IV A7M4 Camera Cage For full cage 2999 3241 3667 3594, the plate will be mounted on the cage via two 14 screws. For half cage 3639, the plate will be mounted on the cage via a 38 screw on th center.. Compact Design Fits the camera cage and XLR handle perfectly and do not block other mounting points other than the top of the camera cage.. In the Box 1x Adapter Plate 38 screw and two 14 screws on the plate 1x Allen Wrench.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

UNIVERSAL USAGEThis SMALLRIG Baseplate 1674 is a simple and light base plate for the most popular cameras, such as for Sony a6500 a6600 a6300 a6400 a6000, Sony A7 series, etc. It attaches to a camera with a 38 or 14 screw.. 15mm LWS ROD SYSTEMThe base plate features 15mm diameter and 60mm spaced rod clamps that allows you to mount two 15mm rods, then lens support or other accessories.. RUBBER CUSHIONSThere are rubber cushions on the base plate, which increases friction for camera to prevent the twisting. Also, the rubber cushions can protect the camera be scratched.. MOUNTING POINTS It provides 14'' and 38'' holes on the bottom for quick mounting a cage onto a tripod or any other plates.. MATERIAL Made of solid aluminium alloy, is very solid and sturdy.

FOR POWER BANK SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required.. SPRING LOADED CLAMP The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 87mm, which covers most products in the market.. RUBBER CUSHIONS The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching.. MOUNTING POINTS On the top, bottom and back of the holder, there are multiple 14 threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages.. LIGHTWEIGHT AND DURABLE The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around..

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

They are industrial standard 15mm rods for 15mm rod systems.. 15mm rod connectors are included. It allows you to connect the 15mm rods together.. Material Aluminum Alloy Color Black. Both 2 pair of 15mm rods has inner M12 thread on each end of the rods.. Includes one pair of 15mm rods 8 inches long and one pair of 15mm rods 12inches long..