Top 10 Best Smallrig 3723

HIGH CUSTOMIZATIONThis handheld kit is specially designed for Fujifilm X-T4, including a cage, a top handle and HDMI Type-C cable clamp to carry camera and make low-angle shot. ANTI-TWIST DESIGNX-T4 cage for Fujifilm secures to the bottom of the camera via a 14-20 screwand features an anti-twist point for further security. MULTIPLE MOUNTING OPTIONSThe form-fitting full cage offers a wide range of mounting points such as 14''-20 threaded holes, 38 -16 locating holes for ARRI, cold shoes, NATO rail for magic arm, side handle, LED light and microphone. HIGH PREMIUM MATERIALX-T4 handheld kit is made of premium aluminium alloy, a solid piece of metal that is highly resistant to oxidation and stands the test of time. A magnetic screwdriver is included for quicly assemble and disassemble and store on the bottom of the cage. HDMI CABLE CLAMPThe HDMI clamp attaches to the side of the cage using a 14-20 screw and two anti-twist pins, which prevents the camera's HDMI cable from accidentally disconnecting.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

THINLIGHTWEIGHTThickness of 6mm, Length of 48mm, weighs only 10g. COMPATIBILITYCompatible with standard NATO clamp. ANTI-OFF DESIGNSafety pins on each side preventing NATO clamp from sliding off. OTHER USEIt can be attached to any accessories with two 14-20 holes via two 14-20 screws included to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.. RECOMMENDATIONIt works with items with NATO clamp, such as SmallRig monitor mount with nato clamp 2100, Magic Arm 207120722133, nato clamp 1973, for quick attachment and release..

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

For DIY Camera Accessories 14 20 extension plate is useful and versatile little bar for DIY camera mount. It comes with many fixing points. Use it to interconnect various camera accessories and set up extra parts as needed. Multiple Thread Holes small cheese plate camera accessories 1091 is equipped with industry standard 14-20 and 38-16 threaded holes, which make it possible to mount on any 14-20 and 38-16 accessories. Multiple Functions Its handy for all those little conversion fit this camera mounting adapter, it can be used as an on-camera multi-gadget mounting accessories, or simply use it as an additional handle when fitted to the top of a camera. Easy to Carry Supplied with arrays of mounting holes in standard 9mm spacing .Easy to put in the bag. Package Includes 1 x Cheese Bar 2 x 14'' Screw 2 x M4 Screw 1 x 14'' Double Head Screw 1 x Hex Screw.

SmallRig camera plate 1598 is equipped with various threaded holes 14-20 thread 38-16 thread, with standard spacing 9mm center to center, allows to set up multiple configuration for your support system. Universal Camera Plate - it fits perfectly with SmallRig rail blocks, dovetails and short rods. Multipurpose - work as a switching plate when attach the plate to the bottom of a DSLR cage, provide lots of options for mounting accessories. Longer Version - length of 90mm, width of 50mm. High Quality made of aluminum alloy, sturdy and durable.

About SmallRig 2797 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. 14-20 ScrewThe cold shoe mount secures to rigs, brackets, and cages via a 14-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 14-20 female thread. Safety Release Button Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. Compatibility Fits Any cages, ball heads, or any rigs features standard 14-20 female thread and 14-20 screw. Package Includes1 x Cold Shoe Mount 1 x Allen Wrench.

HIGH CUSTOMIZATIONSMALLRIG Adjustable Monitor Mount 2889 can hold your monitor or accessory onto the handheld stabilizers. The mount is compatible with DJI RONIN-SRONIN-SC ZHIYUN CRANE 2SCRANE 33SWEEBILL-S MOZA AirCross 2 Gimbals. The monitor mount features three 14-20 threads for additional accessories such as SmallRig Cold Shoe 1241 for microphone or sound receiver.. ROSETTE MOUNTING PLATE FOR RONIN-SSCThe mount attaches to the mounting threads for ZHIYUN CRANE 3, CRANE 3S, WEEBILL-S, or WEEBILL LAB with a built-in thumbscrew, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws.. ALSO FITS MOZA AIRCROSS 2For Moza AirCross2, please do attach the Mounting Plate 2826 first before attaching the monitor mount. 360 TILT RANGEThe monitor bracket features 360 tilt and can hold a monitor rig up to 2.2 lb. Please note that it can only support monitor up to 1kg.. FIRM LOCKINGThe robust mount features a rubber pad to protect your monitor from scratching. Each thumbscrew features slots for Allen wrench to tighten the mounting screws. Note Please use the hex spanner to re-tighten the thumbscrew to ensure safe..