Top 10 Best Smallrig Vh2807

FOR DJI RS 2RSC 2SmallRig Monitor Mount 3026 is specially designed for DJI RS 2RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

FOR DJI RS 2RSCSmallRig Sling Grip 3028 is specially designed for DJI RS 2RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

Two in One Table MountThe extendable desk mount is equipped with one 14 ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work.. Height AdjustabelThe desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 19-39 48.5cm-100cmheight with ball head and C-Clamp, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier.. 360 Swivel BallheadThe ballhead with top 14 screw ensures 360 panoramic rotation for panoramic shooting, -9045 front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The maximum load capacity is up to 6.6 pounds-22 pounds-3kg-10kg.. Desk Light Mount ClampThe camera mount is adjustable for fitting different tables through adjusting the knob at the bottom, suitable for the table thickness up to 5cm 2. Save your space than the light tripod.. Tough DurableMade of aviation aluminum alloy material, with the strong tube diameter 192225mm, it is more durable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint. Weights only 15oz 430g, easily to carry around with you..

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

Quick Release Clamp and Plate for Arca Standard. The QR clamp and plate is designed for mirrorless and DSLR camera. Attach the QR plate to the camera or camera cage, and then drop it into the receiver. Locked via the side knob screw. Multiple 14 and 38 threaded holes on the bottom for attaching different tripod plate.

FOR BALANCING CAMERA ON GIMBALSmallRig Counterweight Kit 3125 is designed to balance cameras with long-lens setups on gimbals by mounting counterweights behind your camera.. COMPATIBILITYIt clamps onto the camera plate via a thumbscrew and is compatible with popular stabilizers on the market such as for DJI Ronin-S, RS 2RSC 2, and for ZHIYUN Crane 2S3SWeebill-S, etc.. STACKABLE VIA 14-20 SCREW AND HOLEThere are multiple 14-20 threaded holes at the bottom, and counterweights can be stacked to meet the balance request in different scenarios.. CONVENIENT FOR STORAGESMALLRIG 3125 is made of aluminum alloy and stainless steel, corrosion resistance. The small shape is convenient for storage, and with strong versatility.. WHAT YOU GETPackage Includes 1 x Mounting Clamp, 2 x 100g Counterweights..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..

VERSATILITYSmallRig 2732 comes with a super clamp with 14 and 38 threads and an articulating arm with 14 screws on both ends respectively. SUPER CLAMPThis super cool clamp was made of lightweight aluminum alloy, comes with 14-20 and 38-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm. 360ROTATIONDouble 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 14 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. RUBBER CUSHIONBoth the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter. WHAT YOU CAN GETMade of aluminum alloy and stainless steel, sturdy and durable. Package includes a Super Clamp and a Articulating Magic Arm.

LOCATIING HOLE FOR ARRI SmallRig 2165 is the first handle with locating hole for ARRI standard in the market. The handle has a simple and compact design and comfortable grip which offers user an excellent handheld experience.. MULTIPLE CONNECTIONThe 2165 is an all-in-one and half handle. It features multiple 14-20 and 38-16 threaded holes, multiple locating holes for ARRI and some built-in cold shoe mounts, thereby offering various mounting options.. ANTI-OFF DESIGNThere is a built-in anti-off pin on the top front of the handle to preventing cold shoe adapter from coming off accidentally.. CHANGEABLE PINSThe locating pins are able to installed horizontally and vertically, which is convenient to fix the camera firmly and stably.. SWEET DESIGNWith built-in magnetic suction design, the included Hex Spanner is ready for your assembly without fear of loss..