Top 10 Best Software Defined Radio

Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only.. Comes with our portable VHFUHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception..

Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle V3 Dongle Only. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only..

Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA adapters and a USB cable for powering the HackRF. HackRF One is capable of half-duplex operation in the range of 1MHz to 6GHz with an instantaneous bandwidth capability of 20MHz. HackRF One is compatible with a wide range of SDR software applications. The included adapters will allow you to connect a wide range of RF accessories to your HackRF One, including F-connector, N-connector, BNC and PAL antennas. Installation support and assistance available directly from Nooelec.

Turn your computer, phone or tablet into a radio scannerham radio receiver that can receive nearly all RF signals Compatible with Windows, Mac OS, Linux, and Android. NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS plane-ground communications, ADS-B plane tracking, AIS ship tracking, POCSAG pagers, NOAA and GOES weather satellites weather images, weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more. The best-performing low-cost RTL-SDR available anywhere Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz. v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna sold separately, product ID B08HGSYB7R or B00R09WHT6. Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience sold separately, product ID B076CYK8XZ. Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m 6.5' RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty and product support through our support portal at httpssupport.nooelec.com. Full datasheet available httpswww.nooelec.comdatasheets100700.

A full, wide-band RF receiver solution for those interested in getting started with software defined radio and with a keen interest in HF bands. The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF. This results in a vastly different HF experience--much better performance, and no loss of gain controls. There is also the option of using directly sampling directly with the NESDR SMArt v5 without the Ham It Up. Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure an NESDR SMArt v5 RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters. Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 247 technical support availability. Please contact our support team any time if you have questions. Amazon-exclusive bundle Only available for a limited time. NOTE enclosure colors may vary contingent on availability.

Included Nooelec USB dongle antenna. RTL2832U interface IC R820T tuner IC on USB dongle. These are custom USB devices tuned for SDR and include much better components than generics. Full 1-year warranty installation support available.

Best available SDR for portable Android IOS applications, remote installations, embedded applications, and anytime a tiny SDR is ideal--less than 1 square. Contains RTL2832U interface IC and the new, improved R820T2 tuner This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance.. 1-year warranty direct from NooElec With locations in both the US Canada, and full technical support services, your investment is a safe and wise one.. Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen. Frequency capability is approximately 25MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter sold separately..

A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly different HF experience--much better performance, and no loss of gain controls. Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters. Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 247 technical support availability. Please contact our support team any time if you have questions. Amazon-exclusive bundle Only available for a limited time. NOTE enclosure colors may vary contingent on availability.

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases. Unmatched price performance--redesigned PCB reduces noise by an average of a full 3dB Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed 0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a - 2PPM initial offset. Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi. Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software. Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty.