Top 10 Best Strikefire Ii Red Dot

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded.

The Strikefire II RedGreen Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions. Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance. An offset cantilever mount is provided allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail. With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery..

The Strikefire II RedGreen Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions.. Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.. An offset cantilever mount is provided allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.. With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary..

The AMG UH-1 Gen II is a close-quarters solution built for military and law enforcement shooters, offering an incredibly fast holographic display to conquer any situation, now with four night-vision compatible settings and a dedicated night-vision button.. With the UH-1 Gen II, you get an improved sight picture through the enlarged viewing window, making target acquisition even faster, and easy battery changes with the toolless battery cover, plus a lighter load at just 11 ounces.. The lightning-quick EBR-CQB reticle is designed to dominate in close, and our FHQ technology virtually eliminates stray light emissions for zero forward signature.. An integrated, quick-release mount makes the sight easy to install and puts the optic at lower 13 cowitness height on either Weaver or Picatinny rails. Rugged construction withstands recoil and impact.. Ultra-hard, scratch-resistantant ArmorTek coating protects exterior lenses from scratches, oil and dirt. O-ring seals help to provide waterproof and fogproof performance in the field..

The VMX-3T Magnifier and Flip Mount combo adds a 3x magnification to your rifle's red dot sight. Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.. The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. Eye Relief-2.2 inches. Field of View-38.2 feet100 yards. The VMX-3T does not require any special sight-in. The dot centering screws can be used to help center your red dot image in the VMX-3T's field of view.. The magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses. Allows for lower 13 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight. Field of View 38.2 feet100 yards.

ROMEO MSR AND JULIET3-MICRO COMBO. Sealed compact red dot sight with 20,000 hour battery life paired with the JULIET3-MICRO magnifier. High performance lens coatings including dielectric coated prism for excellent light transmission. Ultra-compact size and weight. Precise 2 MOA Dot.

The updated SPARC features rugged construction thats still compact, with a lightweight form-factor. The 2 MOA dot is quick to acquire in close ranges, but fine enough for pin-point accuracy at extended ranges.. With up to 700 hours of battery life on the highest setting, 50,000 hour on its lowest, the SPARC red dot will keep working in a variety of conditions.. Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid target transitions. 12 illumination settings to change the dot intensity to the situation at hand.. Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. A unique, integrated base with multi-height mount system allows for either absolute co-witness or lower 13 co-witness mounting on rifle platforms.. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance in all environments. Rugged contruction of single piece chasis keeps the sight compact and lightweight while still withstanding whatever you throw at it.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The Micro 3x Magnifier adds next level 3x magnification to your red dot or holographic sight in an ultra compact, lightweight, and optically crisp package. The V3XM weighs in at only 6.9 oz and only 9.55 oz when including the mount.. Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance. The V3XM offers a wider field of view, better eye relief, a brighter image, and a more true color tone.. Integrated quick-release mount allows fast attachdetach from your rail and a patented camlock desing quickly engagesdisengages magnifier with direct pressure. Adjustable flip mount allows for right or left-handed use.. The magnifier is shockproof and has been nitrogen purged for reliable water and fogproof performance in the field.. Allows for lower 13 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight..

The VMX-3T Magnifier and Flip Mount combo adds a 3x magnification to your rifle's red dot sight. Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.. The lenses are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. The VMX-3T gives you a generous 3.25 inches of eye relief with a 38.2 foot field of view at 100 yards.. The VMX-3T does not require any special sight-in. The dot centering screws can be used to help center your red dot image in the VMX-3T's field of view.. The magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.. Allows for lower 13 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight. Vortex Optics hat included, hat color may vary..

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

ROMEO5 GUN SIGHT - The ROMEO5 1X20mm Red Dot Sight mounts on any platform, and even though it's small, it's tough The solid, lightweight aluminum design gives peak performance years of service, so you can be on the top of a hunt or shooting competition. 2 MOA RED-DOT - For those avid shooters who admire classic red dot reticles on their gun sights, the ROMEO5 has 2-MOA Red-Dot, which is also adjustable It provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC TECH - The versatile ROMEO5 red dot sight features our Motion Activated Illumination technology It is developed to increase battery life by shutting down the system when not in use and instantly activating it by the slightest vibrationmovement. VERSATILE MOUNT - This gun sight comes with an integrated Picatinny mount provides industry-standard mounting options for a wide range of applications Also M1913 Picatinny low mount riser a co-witness 1.41 riser mount guarantees great compatibility. WEATHER RESISTANT - The dependable IPX-7 waterproof and fogproof construction of the ROMEO5 delivers non-stop hunting whatever the weather Unlimited eye relief allows you to acquire the aiming point and the target regardless of the position of your eye.