Top 10 Best Tap And Die Kit

Metric taps dies sizes M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1.0, M71.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75.. SAE taps dies sizes 4-40 NC, 6-32 NC, 8-32 NC, 10-32 NF, 10-24 NC, 12-24 NC, 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 18-28 BSP, 18-27 NPT.. Set includes tap wrench, T-handle tap wrench2 piece, die wrench, screwdriver, thread pitch gaugeSAE Metric. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Taps dies sizes 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 916-12 NC, 916-18 NF, 58-11 NC, 58-18 NF, 34-10 NC, 34-16 NF, 78-9 NC, 78-14 NF, 1-8 NC, 1-14 NF.. Set includes T-handle tap wrench, tap wrench, die wrench with1-12'' odadapter, flat screwdriver, centre punch and spiral flute extractors3mm to 18mm. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Thread chaser set includes UNCsilver 58-11, 916-12, 12-13, 716-14, 38-16, 516-18, 14-20 UNFblack 58-18, 916-18, 12-20, 716-20, 38-24, 516-24, 14-28 Metricgold M141.5, M121.75, M121.5, M121.25, M111.5, M101.5, M101.25, M101.0, M81.25, M61.0. This thread repair kit is specially designed to chase worn and damaged threads and clean stubborn dirt and corrosion without shaving off metal.. This master thread chaser kit is a must-have for any auto mechanic to chase threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and other vehicle bodies.. The thread chaser set is made of high-quality carbon steel, providing strength and maximum durability. The dies and taps are hex-shaped, making them compatible with a wrench or socket.. This master thread chaser set comes with a storage case that keeps everything organized. The taps and dies are color-coded for easy identification, making it easy to differentiate between coarse, fine, metric, and SAE chasers and dies at a glance..

PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses. EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance. VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel Taps for internal threads and Dies for external threads feature with tapered teeth that start threading more easily. MOST POPULAR SIZES - Set includes 20 Metric taps and dies M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75 20 SAE Fractional taps and dies for coarse thread UNC 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 14-20 NC, 516-18 NC, 38-16 NC, 716-14 NC, 12-13 NC 12 SAE Fractional taps and dies for fine thread UNF 10-32 NF, 14-28 NF, 516-24 NF, 38-24 NF, 716-20 NF, 12-20 NF 2 NPT tap and die 18-27 NPT. COMPREHENSIVE ACCESSORIES - Comes with 1 Adjustable Tap Handle 1 T-type Small Tap Handle 1 Adjustable Die Handle 2 Thread Pitch Gauges 1 Slotted Screwdriver 1 Storage and Carry Case.

Ratcheting T handles wind Dies with a 5 swing arc and have a reversing lever to eliminate hand over hand turning. Twist lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting. Die adapters work on round and hex shaped Dies. Die adapters work with the 38inch Drive pass thru ratchet and socket system as well as socket Accessories. Auto locking feature allow the tap adapters to be removed safely. Drive extension adapters provide greater access in confined areas when used with 38inch Drive Extensions. Ratcheting t wrench works with GEARWRENCH pass thru socket system. Blow mold carrying case with tilted tap holders for easy access and storage. Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 34 and 3mm to 18mm.

ALL-IN-ONE TAP DIE SET This 80-piece internal and external threading tool kit by OMT includes both coarse and fine taps and dies in the 34 most needed standard and metric sizes, from 4 14125 to 12 inch and from M3 to M12. USER-FRIENDLY DESIGN This tap and die set is engineered to tight tolerances to meet professional needs the tap ends are 15 to 25 inch long for easy use with the provided standard and metric wrenches. PREMIUM DURABILITY This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence. ADDITIONAL TOOLS In addition to the 68 taps and dies, this tool set includes protective gloves, both long and T-handle wrenches, 18 flathead screwdrivers, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more. BLOW-MOLDED CASES Separate sturdy storage cases store and organize the SAE and metric taps and dies, providing easy organization and portability wherever you need them.

Tap and Die Bit Diversity These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it.. Wrenches All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market.. Construction Material Steel is the base metal used in the construction of these sets but not all steel is created equally Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more. MetricSAE The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes so use inches instead of millimeters. This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, its probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you dont have t. Metal Storage Case More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..

Die adapter works on round and hex shaped dies. Ratcheting T-handles wind dies with a 5 swing arc and have a reversing lever to eliminate hand-over-hand turning. Twist lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting. Die adapters work with the 38inch Drive pass-thru ratchet and socket system as well as socket accessories. Auto-locking feature allow the tap adapters to be removed safely. Spring-loaded cap allows for quick release of large tap adapter. Drive extension adapters provide greater access in confined areas when used with 38inch Drive extensions. Ratcheting T-wrench works with GEARWRENCH pass-thru socket system. Blow mold carrying case with tilted tap holders for easy access and storage.

This tap and die set are made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel.. 86 piece tungsten steel set comes in an organized, rugged plastic storage case. Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman. Tap and die set is designed to thread cutting tap is used to process internal thread, while the die is for external thread. Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.

Tap and Die Bit Diversity These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it.. Wrenches All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market.. Construction Material Steel is the base metal used in the construction of these sets but not all steel is created equally Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer.. MetricSAE The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes so use inches instead of millimeters. This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, its probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you dont have t. Metal Storage Case More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..

SAE METRIC TAP DIE SET These 54 OMT taps and dies cut and clean internal and external threads in common conventional and metric sizes the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 18 flathead screwdriver, and a thread pitch gauge to cover all your needs. USER-FRIENDLY DESIGN Our standard and metric tap die set is engineered to tight tolerances to meet professional needs the tap ends are 5-10mm long to allow easier use with the provided wrenches. WIDE APPLICATION These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more. CHROMIUM STEEL The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity. BLOW-MOLDED CASE The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.

PREMIUM MATERIAL AND DURABILITY Industrial grade GCr15 bearing steel construction ensures durability and tool longevity. EXCELLENT CUTTING PERFORMANCE All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance. TAPERED TEETH DESIGN Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading. ALL-INCLUDED SET This kit comes with a full range of most popular SAE taps dies with both coarse and fine sizes, plus all needed wrenches, handles, a gauge and a storage case. VERSATILITY AND WIDE APPLICATION Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.

CUT RENEW THREADS The ABN Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screwsbolts, cut raw material Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading. FITS YOUR APPLICATION Metric Taper taps 2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5, Plug taps same size as taper taps Dies same size as taper taps Tap wrenches M3-M12 x 116-12, M6-M20 x 14-34 Die wrenches 25mm x 1, 38mm x 1-12 OD T-type tap wrench M3-M6. BUILT TO LAST Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance Metric tap set has 3-4 flute abrasive cutting edges each so you can easily cleanrepair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials. EASY STORAGE Heavy-duty 17 x 2.25 x 12.75 inch 43.2cm x 5.7cm x 32.4cm plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization Each compartment is labeled with sizing for simple identification. PACKAGE CONTENTS Combination set contains both metric taps and dies Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt.