Click here to learn more about these products.
Taramp's MD 1800.1 1 Ohm 1800 Watts Class D Full Range Mono Amplifier
Excellent for voice as well as bass. 1 ohm. 1800 watts. Mono. Bass boost.
Taramps HD 3000 2 Ohms Class D Full Range Mono Amplifier
Excellent for voice as well as bass. 2 ohms stable. 3000 Watts RMS. Single channel. Bass boost.
Taramps TL 1500 Full Range 390 watts RMS 3 Channels Car Audio 2 Stereo Channels 1 Sub Channel Class D Amplifier, RCA/Wire Input, Bass Boost 13.8 VDC System, White
390 watts. Sub Output 15Hz to 90Hz. Stereo Output LR 90Hz to 30KHz. FULL RANGE. Technology and Sophistication.
Taramps TS 400x4 FULL RANGE 2 Ohms 400 watts RMS 4 Channels Car Audio Amplifier RCA Input Class D, 2 Bridged Channels, Multichannel Amp, RCA, Aluminium High Power
POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 4mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire.. Recommended wire gauge fuse Positive negative power supply cable 11 AWG Output cables wire gauge 15 AWG Remote cable 18 AWG Protection fuse or circuit breaker 20A.. INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. Short-circuit Protection Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output..
Taramps Smart 3 BASS Multi-Impedance 0.5 to 2 ohms 3000 Watts RMS High Performance Class D Amplifier, Monoblock Clip Monitor Power Control System Technology, Crossover Bass Boost Great for Subwoofers
Multi-impedance Featuring new control technology and new functions, the SMART 3 BASS has 3000W RMS rated power in the range of 0.5 to 2 Ohms 0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power. RCA input for up to 4V RMS Input gain adjustment that allows head units up to 4V RMS output level. Power connector for cables up to 10 AWG Allows the use of power cables with larger gauge up to 50mm for higher performance. AUTO-Restart Protections The amplifier automatically restarts after a protection event. RAMP audio initialization After turning on the amplifier, audio is released gradually ramp.
Taramps MD 1200.1 Full Range Amplifier 1200 Watts RMS 1 Ohm 1 Channel High Efficiency Mono Amplifier Class D, Bass Boost Car Audio Sound Monoblock, Crossover, High Power Amp
Full-range. Class-D amplifier. Crossover HPF and LPF. Frequency Response 10Hz 20KHz. 1 channel of 1200 watts RMS 1 Ohms.
Taramps HD 3000 Class D Amplifier 1 Ohm 3000 watts RMS Full Range Mono Amplifier 1 Channel Car Audio Amp
INPUT R and L Signal inputs. Connect these signals to the head unit's RCA outputs. Give preference to good quality shielded cables to avoid noise interference.. LEVEL Sets the input sensitivity of the amplifier, which allows for optimal adjustment to the output signal levels of almost all Head Unit models found on the market.. HIGH PASS Variable setting from 10Hz to 80Hz, which sets the beginning of the amplifier's frequency response.. LOW PASS Variable setting from 80Hz to Full, which sets the end of the amplifier operating frequency.. BASS BOOST- BOOST An extra 50Hz boost for the bass with variable gain from 0 to 10dB..
Taramp's DS 800x4 1 Ohm 4 Channels 800 Watts Amplifier
4 Channels. 800 watts. Small form factor. 1 ohm.
Taramps DS 2000x4 Multi-Channel Amplifier 4 Channels 2000 watts RMS 2 Ohms Car Audio Amplifier Full Range Class D Bridgedable, Crossover High/Low Pass, Power Amp
It has 4 kennels of 500 watts RMS each. Its frequency respoosta is from 8Hz to 20 KHz to -3dB. Supply voltage between 9 and 17 VDC. Operation class D.
Taramp's MD 5000.1 2 Ohms 5000 Watts Class D Full Range Mono Amplifier
Mono 1 x Taramps Electronics MD5000.2 Full Range 2 Ohms 5000W Amplifier. Operation Class Class D Channels - 2 Ohms 5000W. Input Impedance 10K Ohms Output Impedance 2 Ohms. Bass Boost 0 to 10.5dB50Hz. MD 5000.2 amplifier from Taramp's is intended for high-performance automotive audio systems and high-performance engineering.
Best Choice
Best Value
