Top 10 Best Taramps 2000x4 Channel

It has 4 kennels of 500 watts RMS each. Its frequency respoosta is from 8Hz to 20 KHz to -3dB. Supply voltage between 9 and 17 VDC. Operation class D.

Full-range. Class-D amplifier. Frequency Response 45Hz 30KHz. 4 channels of 75 watts RMS 2 Ohms. 5.43 x 1.93 x 4.72 In.

INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 10mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire. WIRE HIGH LEVEL INPUT Input for high level low impedance signals from the speaker output of the players or multimedia center..

4000 Watts RMS. 4 channels. 1 ohm stable. Compact design. Suitable to amplify sub-bass, bass, mid-bass, mid-range, high-mid and treble.

Full-range. Class-D amplifier. 4 channels of 110 watts RMS 2 Ohms. Crossover HPF and LPF. Variable gain control.

strength, income and performance are some of the synonyms of this amplifier module, it has a maximum power of 20.000 watts rms at 0.5 ohm, thermal protection and anti short circuit, it is powered by batteries in series.. member of a unique line in its category, delivering extremely high power in medium and large automotive sound systems. emphasis for subwoofer to high midrange, with high tone performance and sound quality.. operation class pt classes d, number of channels 01, maximum power 164 vdc - 0.5 ohm 20,000w rms, input sensitivity 330mv level 100 0.5 ohm, signal to noise ratio 98db, frequency response 10hz - 10khz 1db. input impedance 22k ohms, protection system short-circuit to output short on output compared to gnd, low impedance at output, highlow supply voltage and thermal protection, min. supply voltage 100 vdc, maximum power supply voltage 190 vdc. consumption at rest 150 ma, maximum music consumption 67 a, maximum consumption in sinusoidal signal 134 a, dimensions h x w x d 8.98-in x 2.52-in x 14.09-in, weight 7.92lb.

1 x Taramps TS400X4 Full Range Amplifier. Quantity 1 Amplifier Number of Channels 04 Max Power at 13.8 VDC 2 Ohms 400W 4 x 100W RMS Max Power at 13.8 VDC 4 Ohms 252W 4 x 63W RMS Bridged at 13.8 VDC 4 Ohms 400W 2 x 200W RMS. Input Sensitivity 200mV VolMax Signal to Noise Ratio greater than 90dB Frequency Response Full Range 18Hz to 30kHz -3dB High Pass Crossover HPF 90Hz -12dB 8th Low Pass Crossover LPF 90Hz -12dB 8th. Input Impedance 22K Ohms Thermal Protection System and Short Output Minimum Supply Voltage 8 VDC Maximum Supply Voltage 16 VDC. Standby Power 0.8 A Maximum Musical Power at 13.8VDC 16.5 A Maximum Consumption in Sine Signal 1kHz 13.8VDC 33 A.

INPUT R and L Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit , using good quality shielded cables to avoid noise influence.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Unit found in the market.. HIGH PASS Variable adjustment from 10Hz to 80Hz, which determines the beginning of the amplifier operating frequency. LOW PASS Variable adjustment from 80Hz to Full, which determines the end of the amplifier operating frequency.. MONITOR Connection to an accessory, which function is to monitor the amplifier and it is where all information from the indicator LEDs, such as distortion CLIPTEMP and protection actuation PROT, will be displayed simultaneously..

Excellent for voice as well as bass. 2 ohms stable. 3000 Watts RMS. Single channel. Bass boost.