Top 10 Best Taramps 3k

Maximum Power 14.4 VDC - 1 Ohm 3000 Watts RMS 14.4 VDC - 2 Ohm 1920 Watts RMS.. Crossover High Pass HPF 8Hz 30Hz -12dB8 Variable. Crossover Low Pass LPF 60Hz 250KHz -12dB8 Variable. Input Sensitivity 220mV - Frequency Response 8Hz 250Hz -3dB. Dimensions H X W X D 9.41 x 2.87 x 8.58- Weight 6.51lb.

Multi-impedance Featuring new control technology and new functions, the SMART 3 BASS has 3000W RMS rated power in the range of 0.5 to 2 Ohms 0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power. RCA input for up to 4V RMS Input gain adjustment that allows head units up to 4V RMS output level. Power connector for cables up to 10 AWG Allows the use of power cables with larger gauge up to 50mm for higher performance. AUTO-Restart Protections The amplifier automatically restarts after a protection event. RAMP audio initialization After turning on the amplifier, audio is released gradually ramp.

INPUT R and L Signal inputs. Connect these signals to the head unit's RCA outputs. Give preference to good quality shielded cables to avoid noise interference.. LEVEL Sets the input sensitivity of the amplifier, which allows for optimal adjustment to the output signal levels of almost all Head Unit models found on the market.. HIGH PASS Variable setting from 10Hz to 80Hz, which sets the beginning of the amplifier's frequency response.. LOW PASS Variable setting from 80Hz to Full, which sets the end of the amplifier operating frequency.. BASS BOOST- BOOST An extra 50Hz boost for the bass with variable gain from 0 to 10dB..

Excellent for voice as well as bass. 2 ohms. 3000 watts. Mono. Bass boost.

Excellent for voice as well as bass. 2 ohms stable. 3000 Watts RMS. Single channel. Bass boost.

This MD 3000 is in 1 Ohm, FULL RANGE amplifier with a maximum power of 3000-Watts RMS. This amplifier has one internal ventilation fan and for perfect functioning the amplifier must be installed in a cool and aired place. The PositiveNegative power supply cable is 4 AWG. The output cables wire gauge is 9 AWG and the remote cable is 18 AWG. For Protection fuse or circuit breaker please use 150A.. Output Power 12.6VDC 3000 watts RMS in 1 Ohm 1920 watts RMS in 2 Ohms. Crossover High Pass 10Hz to 90Hz Low Pass 90Hz to 18KHz.

INPUT R and L Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit , using good quality shielded cables to avoid noise influence.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Unit found in the market.. HIGH PASS Variable adjustment from 10Hz to 80Hz, which determines the beginning of the amplifier operating frequency. LOW PASS Variable adjustment from 80Hz to Full, which determines the end of the amplifier operating frequency.. MONITOR Connection to an accessory, which function is to monitor the amplifier and it is where all information from the indicator LEDs, such as distortion CLIPTEMP and protection actuation PROT, will be displayed simultaneously..

2 Pieces Bundle of Taramps products. HD 3000 1 Ohm - With a maximum power of 3000 Watts RMS, the amplifier is mono, 1-ohm and has 1 channel.. The HD 3000 1 Ohm is compatible with all types of speakers, drivers and tweeters.. TS 400X4 2 Ohms - Was designed with the highest performance to suit most types of car audio systems. It is multichannel, with 4 channels of 100 Watts RMS, with a maximum power of 400 Watts RMS at 2 ohms.. The TS 4004 is a FULL RANGE amplifier. It features thermal and short-circuit protection, plus LED indicator and crossover..

Premium black series with configurable adjustments. 2 ohms. Excellent for voice as well as bass. 3000 watts. Mono.