Top 10 Best Taramps 440x4

Full-range. Class-D amplifier. 4 channels of 110 watts RMS 2 Ohms. Crossover HPF and LPF. Variable gain control.

1 x Taramps TS400X4 Full Range Amplifier. Quantity 1 Amplifier Number of Channels 04 Max Power at 13.8 VDC 2 Ohms 400W 4 x 100W RMS Max Power at 13.8 VDC 4 Ohms 252W 4 x 63W RMS Bridged at 13.8 VDC 4 Ohms 400W 2 x 200W RMS. Input Sensitivity 200mV VolMax Signal to Noise Ratio greater than 90dB Frequency Response Full Range 18Hz to 30kHz -3dB High Pass Crossover HPF 90Hz -12dB 8th Low Pass Crossover LPF 90Hz -12dB 8th. Input Impedance 22K Ohms Thermal Protection System and Short Output Minimum Supply Voltage 8 VDC Maximum Supply Voltage 16 VDC. Standby Power 0.8 A Maximum Musical Power at 13.8VDC 16.5 A Maximum Consumption in Sine Signal 1kHz 13.8VDC 33 A.

15000 watts. 1 ohm.

It has 4 kennels of 500 watts RMS each. Its frequency respoosta is from 8Hz to 20 KHz to -3dB. Supply voltage between 9 and 17 VDC. Operation class D.

30000 Watts. 1 Channel. 1 Ohm. 8Hz to 250Hz. Extreme bass.

INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 10mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire. WIRE HIGH LEVEL INPUT Input for high level low impedance signals from the speaker output of the players or multimedia center..

800 Watts RMS. 4 channels. 2 ohms stable. Compact design. Full range.

Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.. Power This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 2 Ohms, 192x4 4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.. Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass Lowpass crossovers.. Features The 4 channel bass boost car amplifier has features like - Frequency Response 9Hz-27KHZ, Bass Boost, SNR88DB, Remote Bass Knob, 2-way protection, hilow pass crossovers and 2 Ohm Stable. Includes - 1 Taramps 1200W RMS 4 Channel Class D Amplifier.

INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market.. POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 16mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire.. Short-circuit Protection Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output.. Positive negative power supply cable 5 AWG.