Top 10 Best Taramps Md 3000.1

3000 Watts 1 Channel 1 Ohm.. Maximum Power 12,6 VDC - 1 OHM 3000W RMS 12,6 VDC - 2 OHMS 1920W RMS. Frequency Response10Hz 18KHz -3dB - Crossover High Pass HPF10Hz 90Hz -12dB8 Variable - Crossover Low PassLPF90Hz 18KHz -12dB8 Variable. Maximum Music Consumption150A - Maximum Consumption in Sinusoidal Signal300A. The Taramps MD 3000.1 has been carefully designed with the highest technology, offering high efficiency and performance for various types of car audio systems. This amplifier covers the whole frequency range, that is to say that it is a FULL RANGE module. It is classified as mono and has a channel with a maximum power of 3000-Watts RMS..

Excellent for voice as well as bass. 2 ohms. 3000 watts. Mono. Bass boost.

Excellent for voice as well as bass. 2 ohms stable. 3000 Watts RMS. Single channel. Bass boost.

INPUT R and L Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit , using good quality shielded cables to avoid noise influence.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Unit found in the market.. HIGH PASS Variable adjustment from 10Hz to 80Hz, which determines the beginning of the amplifier operating frequency. LOW PASS Variable adjustment from 80Hz to Full, which determines the end of the amplifier operating frequency.. MONITOR Connection to an accessory, which function is to monitor the amplifier and it is where all information from the indicator LEDs, such as distortion CLIPTEMP and protection actuation PROT, will be displayed simultaneously..

Maximum Power 14.4 VDC - 1 Ohm 3000 Watts RMS 14.4 VDC - 2 Ohm 1920 Watts RMS.. Crossover High Pass HPF 8Hz 30Hz -12dB8 Variable. Crossover Low Pass LPF 60Hz 250KHz -12dB8 Variable. Input Sensitivity 220mV - Frequency Response 8Hz 250Hz -3dB. Dimensions H X W X D 9.41 x 2.87 x 8.58- Weight 6.51lb.

INPUT R and L Signal inputs. Connect these signals to the head unit's RCA outputs. Give preference to good quality shielded cables to avoid noise interference.. LEVEL Sets the input sensitivity of the amplifier, which allows for optimal adjustment to the output signal levels of almost all Head Unit models found on the market.. HIGH PASS Variable setting from 10Hz to 80Hz, which sets the beginning of the amplifier's frequency response.. LOW PASS Variable setting from 80Hz to Full, which sets the end of the amplifier operating frequency.. BASS BOOST- BOOST An extra 50Hz boost for the bass with variable gain from 0 to 10dB..

30000 Watts. 1 Channel. 1 Ohm. 8Hz to 250Hz. Extreme bass.

15000 watts. 1 ohm.

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.. It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power 12.6 VDC - 0.5 OHM 12,000W RMS 12.6 VDC - 1 OHM 7,200W RMS. Input Sensitivity 220mV, Signal to Noise Ratio 95dB, Frequency Response 10 Hz 5 kHz -3dB, Crossover high pass HPF 10 Hz 90 Hz -12dB8th Variable, Crossover low pass LPF 90 Hz 5 kHz -12dB8th Variable, Bass Boost Freq. 35 Hz 55 Hz. Boost 0 10dB, Efficiency 79, Input Impedance 15K ohms, Output Impedance 0,5 ohm, Protection system Output Short circuit, Output Short circuit in relation to the GND, Low Impedance Protection High or Low voltage Protection Thermal protection. Maximum Power Supply Voltage 16VDC, Consumption at rest 3.6A, Maximum music consumption 602.5A, Maximum consumption in sinusoidal signal 1,205A, Dimensions H x W x D 8.976 x 2.755 x 21.653 inches 228 x 70 x 550mm, Weight 17.526 lbs 7.95 kg.