Top 10 Best Taramps Md8000

8000 Watts. 1 Channel. 1 Ohm. Full Range. Small size.

This MD 8000.1 in 2 Ohms, dual input amplifier with a maximum power of 8000-Watts RMS. This amplifier has two internal ventilation fans, which cannot be obstructed.. The PositiveNegative power supply cable is 2x 20 AWG. The output cables wire gauge is 7 AWG and the remote cable is 18 AWG. For Protection fuse or circuit breaker please use 400A.. Output Power 12.6VDC 8000 watts RMS in 1 Ohm 4800 watts RMS in 2 Ohms. Crossover 10Hz 90Hz -12dB8 Variable 90Hz 10KHz -12dB8 Variable.

The recommended wire gauge for Positive negative power supply cable is 2x 20 AWG. For Output cables wire gauge is 7 AWG and for protection fuse or circuit breaker is 360A. This amplifier have a Smart Cooler with four internal ventilation fans. For perfect functioning, the amplifier must be installed in a cool and aired place with at least 125mm space around the heatsink for proper heat spreading. The usually working temperature of amplifier is 70C158F.. The Smart 8 Bass is a Multi-impedance amplifier and contains a new control technology and new functions with 8000W RMS rated power in the range of 0.5 to 2 Ohms 0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power. Dual RCA connector with input and output function, eliminates the needing of Y cables for send the same unput signal to another amplifier. Input gain adjustment that allows head units up to 4V RMS output level. The amplifier automatically restarts after a protection event and have LED inticators on top of product..

5000 Watts. 1 Channel. 1 2 Ohms. High Efficient. Automatic Impedance.

8000 Watts RMS. 1 ohm stable. Single channel. Designed for optimal performance with bass. Customized adjustments according to trunk size.

The amplifier automatically restarts after a protection event and have LED inticators on top of product.. Dual RCA connector with input and output function, eliminates the needing of Y cables for send the same unput signal to another amplifier. The recommended wire gauge for Positive negative power supply cable is 2 x 20 AWG. For Output cables wire gauge is 7 AWG and for protection fuse or circuit breaker is 400A. This amplifier have a Smart Cooler with four internal ventilation fans. For perfect functioning, the amplifier must be installed in a cool and aired place with at least 125mm space around the heatsink for proper heat spreading. The usually working temperature of amplifier is 70C158F.. The Smart 8 is a Multi-impedance amplifier and contains a new control technology and new functions with 8000W RMS rated power in the range of 1 to 2 Ohms 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power.

Multi-impedance Featuring new control technology and new functions, the SMART 3 BASS has 3000W RMS rated power in the range of 0.5 to 2 Ohms 0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power. RCA input for up to 4V RMS Input gain adjustment that allows head units up to 4V RMS output level. Power connector for cables up to 10 AWG Allows the use of power cables with larger gauge up to 50mm for higher performance. AUTO-Restart Protections The amplifier automatically restarts after a protection event. RAMP audio initialization After turning on the amplifier, audio is released gradually ramp.

The Smart 5 is a Multi-impedance amplifier and contains a new control technology and new functions with 5000W RMS rated power in the range of 1 to 2 Ohms 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power. This amplifier have a Smart Cooler with four internal ventilation fans. For perfect functioning, the amplifier must be installed in a cool and aired place with at least 125mm space around the heatsink for proper heat spreading. The usually working temperature of amplifier is 65C.. The recommended wire gauge for Positive negative power supply cable is 2 x 20 AWG. For Output cables wire gauge is 7 AWG and for protection fuse or circuit breaker is 230A. GAIN Adjusts the input sensitivity of the amplifier, allowing a perfect adjustment to the output signal levels of various head units models on the market. It is possible to adjust from 4V minimum sensitivity to 0.2V maximum sensitivity.. IN Input of signal to be amplified. Connect the to the RCA output of the Head Unit using good shielded cable to avoid noise interference. OUTAudio signal output. Sends the same input IN signal to another amplifier, allowing cascading..

Maximum Power 14.4 VDC - 1 Ohm 3000 Watts RMS 14.4 VDC - 2 Ohm 1920 Watts RMS.. Crossover High Pass HPF 8Hz 30Hz -12dB8 Variable. Crossover Low Pass LPF 60Hz 250KHz -12dB8 Variable. Input Sensitivity 220mV - Frequency Response 8Hz 250Hz -3dB. Dimensions H X W X D 9.41 x 2.87 x 8.58- Weight 6.51lb.

The HD 3000 is in 4 Ohms with 3000 watts RMS 1 Channel amplifier. Compatible with all types of speakers, drivers and tweeters.. The PositiveNegative power supply cable is 4 AWG. The output cables wire gauge is 9 AWG and the remote cable is 18 AWG. For Protection fuse or circuit breaker please use 150A.. This product comes with an M1 LED Monitor.. LED Monitor Telephone-style connection to the M1 remote indicator LED, which monitors the amplifier and is where all LED indicator information such as distortion CLIPTEMP and protection PROT will be displayed simultaneously. Protection System Short-Circuit to output, short on output compared to GND, low impedance at output, HighLow supply voltage and thermal protection.