Top 10 Best Taurus G2c Red Dot

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

OWBIWB CONVERTIBLE User manual and accessories are included for easy switch between IWB and OWB Carry.. Taurus G2C HOLSTER, Taurus G3C Holster, PT111 Millennium G2, PT140 Millennium G2These G2C Taurus holsters are tailor-made and also compatible for Taurus G3C, PT111 Millennium G2, PT140. RIGHT HAND CARRY. Please note these holsters are not fit for any attachment like laserlight accessories.. TRIGGER GUARD COVER, NO RISK of PRESSING MAG RELEASEOur precise Aluminum molds designed by our CAD engineers ensure exceptional consistency and accuracy of holsters, covering all access to the trigger, and uncovering mag release saving the trouble and danger of pressing it accidentally by pressure from holster.. FIT LIKE A GLOVE WITH AN AUDIBLE CLICKProvide secure retention with tension-adjustment screws. A handful of grip makes your drawing and pulling quick and smooth without any scratch on slide.. ANGLE THE WAY YOU WANT WITH -5 TO 20 DEGREES ADJUSTABLE CANT1.5'' BELT CLIPS are rock, solid with hook at bottom and they will fit tight on your belt and stay when drawing. Cant is adjustable from -5 to 20 degrees, allowing you to angle the holster perfectly for appendix AIWB, strong side, behind the hip or cross draw. All the edges are polished and smooth to make you feel comfortable when its again the skin..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

For PT111 G2, PT140 G2, PT709, PT740, G2G3,TX22 Vortex Venom Viper,Burris Fastfire,Ade, NOT FIT THE Counterfeit SIGHT.. One Piece Design for a Secure Zero Hold,Easy to install. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.Installation hardware and tools included.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.. 100 MONEY-BACK warranty within 30 days of purchase. NO QUESTIONS ASKED.LIFETIME WARRANTY.Please contact us for any questions,7X24 hours quick response..

Folding Red dot reflex lens 22mm X 16mmFolds down flat when not in use.. With a push of a button the Flip Dot lens flips up and automatically turns on.. Objective lens diameter 22mm X 16mmMagnification 1Xred dot Reticle.. Dot size 3 MOA Length 2.0 in Width 1.2 inHeight 1.1 in.. Weight 1.0 oz without plateBattery 1CR2032 batteryincluded..

210.5MM Width Rail is required - The red laser is compatible with Glock 17 19 w a rail, which should have cross slot to tighten the laser sight.. Bright Safe Lase - The red laser output 5mW, Class IIIA. The red pistol laser is very safe and highly visible in any environments, which can reach up to 50-100M. during the day and up to 600-1000M at night.. Left Right Switches - Easy ambidextrous activation for left and right-handed users. The red gun laser is made of polymer materials, which offers shockproof and stable experience.. Rechargeable Built-in Battery - The red beams for guns is powered by a built-in rechargeable battery, A full charging takes about 1.5 hour and provides about 3-4 hours max running time.. You need to know - Please slowly tune Elevation and Windage interactively, only one direction may lock or damage the threads..

High precisionWith parallax corrected unlimited eye-relief, distance unlimited ,the red dot won't move with your head or body,it's accurate and quick to capture target.. PORTABLE Red Dot Reflex Scope The compact reflex scope folds easily when you're not using it for easy portability and storage. Just press the button and the scope will go into working mode. Excellent materialThe Red Dot Compact Flip Reflex Sight is made of high-quality aluminum alloy, which is anti-oxidation, waterproof and shockproof, and durable.. Easy to useThe compact red dot flip mirror can be mounted directly on the G. MOS pistol, it can be mounted on most RMR cut slides with the provided riser, you can easily mount it and adjust the height.. Peace of mindIf you encounter any problems during use, please feel free to contact us, we will try our best to help you solve the problem. Please buy with confidence. We offer exchange or refund services..

The Cyelee WOLF0 Compact Red Dot utilizes the RMR footprint. It will fit any pistol mounting plateslidecut that is compatible with RMRSRO, and Holosun 407C507C508T red dots.. The Cyelee WOLF0 feature Shake Awake motion sensing technology to help save battery life. While not turned off, after 5 minutes without motion, the red dot goes to sleep. It will not be visible until moved but even the smallest tap or tilt will wake it up within a second to the previous brightness setting. This allows storage without wasting battery life while still being ready in a second when you need it.. The WOLF0's MOA Red Dot allows for clear and rapid target acquisition while providing a precise point of aim get shots down range and on target fast. The aircraft grade aluminum housing ensures this unit will stand up to rough usage as well as it does to normal daily use.. Fully multi-coated glass offers both a distinct red dot as well as a clear and untinted picture. Choose between 10 brightness levels including 2 dim enough for enhanced brightness opticsinvisible to the naked eye.. The Red Dot is ready to use on your rifle or shotgun with the included optional picatinny mount adapter. Tested in freezing conditions, fully submerged, and under high pressure water streams. More than capable for use in the rain or snow..

RMR Red Dot Sight 5MOA for TS9 G2C Glock Rifle Airsoft Pistol Hunting Reflex Sights Optic Scope 1913 Mount fit 20mm Weaver Rail. 7 meters with almost no parallax. Weight 65g, easy to carry. Easy-to-understand installation of Lorolock base. 1. Attach the low rail mount to the using the included screws. 2. Attach the to the base rail, making sure the recoil lug is solidly seated in the base groove. 3. Check to see that the clamp is fully down and hooked around the outside of the base. 4. Press the down and forward toward the muzzle and firmly tighten base clamp screw using large coin or flat blade screwdriver.

Durable Design - Compatible with most subcompact pistols and handguns with a picatinny or weaver rail.. Adjustable Windage Elevation - Red lazer beam can be turned with wrench provided. Built-in Rechargeable Battery - Charging indicator with over-charging protection, a USB cable is included. Red Laser - 5mW, 635-650nm, Class IIIA, meets US safety guide. Water-resistant, shockproof, dustproof - Professional 12 months warranty customer service..