Top 10 Best Taurus G2c Red Dot Sights

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

This listing comes with ADE red dot, a picatinny mounting platepre-assembled and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate also fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. It is designed to fit the slidefootprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight.. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with Holosun 407k507k, Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

Comes with an ADE Bertrillium RD3-013 RED dot sight, a picatinny plate, and a optic mounting plate designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATORand has two holes for plate's two teeth for the plate to insert to. Please fully inspect your p320 model and optic cut before purchasing. The Pistol optic plate does NOT fit Standard Sig P320, Sig P320 Military SurplusMil Spec version, Sig P320 RX. Does NOT fit standard X5 that does NOT has a loaded chamber indicator.. The pistol optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. 4 MOA. Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.. Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.. Shock proofFog proof and Waterproof for 30 minutes under 4ft water. New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a 2032 BatteryIncluded. Every time you turn on the dot it stays the same brightness level last time it was turned off.

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sightsee photo. We are listening Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.. The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.. This GREEN dot comes with a picatinny mounting plate pre-assembled might be packaged separately in the retail package, depends on the ADE model. Please use the allen wrench provided to take out the 2 hex screwsM3x6mm on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates. 4 MOA. Operates with a single CR2032 batteryinstalled underneath. Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W. Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Full metal construction with glass lens. No plastic body, no plastic lens.. Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

This listing comes with ADE red dot, a picatinny mounting platepre-assembled and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate also fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.. ShockFog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Why dont I see a perfect round dot Instead, I see a splashed dot, half-moon shape, multi dot, starburst etc. Answer It is very likely 99 chance you have astigmatism that you are not aware. What you see is a led light image reflected on the lens. One simple way to find out is to use your cellphone to take a photo of the dot. If you see a circle dot in the photo you took, you basically diagnosed you have AstigmatismBecause cellphone is a machine does not has human astigmatism.. Many users with astigmatism decide to continue to use the imperfect dot, or use a bigger MOA red dot such as 6MOA instead of 3MOA. Some users also see green dots better than red dots, it really depends on the individual case. Or users can use a totally different optics which is not a reflex sight such as a rifle scope..

Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

Reticle allows for 4 different styles. Dot, CircleDot, CrosshairDot, CrosshairCircleDot combinations. All in one sight. A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness. Very sturdy and secure rail mounting system. Will not come loose, made to last. Parallax corrected unlimited eye-relief, where the dot goes, so does the bullet. Ultralight, waterproof and shockproof - Powered one 3V lithium battery included.

For PT111 G2, PT140 G2, PT709, PT740, G2G3,TX22 Vortex Venom Viper,Burris Fastfire,Ade, NOT FIT THE Counterfeit SIGHT.. One Piece Design for a Secure Zero Hold,Easy to install. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.Installation hardware and tools included.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.. 100 MONEY-BACK warranty within 30 days of purchase. NO QUESTIONS ASKED.LIFETIME WARRANTY.Please contact us for any questions,7X24 hours quick response..

The RXS-100 is the new market leader in price and performance. Class leading value starts with multi-platform versatility with its DeltaPoint Pro mounting pattern, daylight bright 4 MOA dot with 8 settings, side battery door, up to 5000 hours of battery life, and an included Weaver-style low-rise mount.. REFLEX SIGHT RXS-100 has a clear 4 MOA dot with 8 brightness settings. ADDITIONAL FEATURES Detented windageelevation, top loading battery for easy replacement, mounts on an array of pistols, MSRs, and shotguns.. PURPOSE BUILT QUALITY Rugged aircraft grade durable aluminum construction, long lasting 5,000 hour on mid-setting battery. IDEAL FOR Trainingtarget shooting, home defense, Hunting.

True 1x with no magnification and no image distortion allows you to aim a target with both eyes open to save your time and have more comfort during the shooting.. Medium size 3.5 MOA red dot reticle this size wont cover your target at long range and will help for fast target acquisition at close distance.. Side access to battery change battery without reattaching and rezeroing your red dot.. Extreme durability shockproof design grants resistance against high recoil, drops and rough environment. 3 Year Warranty. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to pistols with 1.9IN4.8cm Length Optic Cut..

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. ROMEOZero is Compatible With - Direct mount to ROMEOZero - Shield RMS-c footprint - J-Point footprint.. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. SIG Sauer assumes no liability if a user attempts to mount a ROMEOZero to a Springfield Hellcat pistol slide.. Please note this product is not compatible with slides cut to accept a standard ROMEO1..