Click here to learn more about these products.
Tilta Power Supply Module for Ring Grip | Power Outputs for Basic and Advanced Ring Grips, Mount External Monitors via Cold Shoe | TGA-RG-PM
CUSTOM DESIGNED for Basic or Advanced Ring Grip. MONITOR YOUR SHOT Mount and Power Monitors or Wireless Video Systems. MOUNT ACCESSORIES via Cold Shoe -20 Threads. POWER OUTPUTS 1x 5V USB and 1x 14.8V P-Tap. STURDY Aluminum and Steel Construction.
Tilta Extended Quick Release Baseplate | Compatible with DJI RS2, RSC2 | Provides Extra Security, Better Balance for Larger Cameras on RS2/RSC2 | TGA-ERP
BETTER BALANCE Provides Flexibility when Balancing your Gimbal. EXTRA SECURITY Rubber Cushions and Two Screws Keep the Camera Secure. UNIVERSAL 14-20 and 38-16 Threads Connect to Most Camera Systems. CUSTOM DESIGNED for DJI RS2 and RSC2. LIGHTWEIGHT DURABLE Made of High Performance Aluminum Alloy.
Tilta Quick Release Baseplate Counterweight Adapter | Compatible with DJI RS2, RSC2 | Supports Counterweight on The Front and Back of The RS2/RSC2 Mounting Plate| TGA-BCA
Properly balance your camera setup on the gimbal if its too top heavy. Attaches to the bottom of the baseplate of the DJI RS 2 to allow for the addition of counterweights. Comes with 60g counterweight. Quality Construction from Aluminum-alloy and stainless steel. Available in Black.
Tilta FF-T06 Mini Follow Focus | Lightweight, Mechanical Lens Control for DSLRs, Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage | FF-T06
PRECISE FOCUS via Fluid Dampening System and Marking Disc. AB MARKS Allow you to Set Hard Stops. EASY SETUP via any Single 15mm Rod. COMPATIBLE with Most Lenses via 0.8mm Pitch Gear or Included Focus Gear Ring. LIGHTWEIGHT COMPACT Weighing Only 220g 7.7 oz.
Tilta Power Supply Base Plate for RS 2 Compatible with RS2 Gimbal | External Power Solution for RS2, Security Bracket Included | TGA-PBP
SECURE EASY ASSEMBLY with Flexible Installation Options for Various Shooting Needs. MOUNTING OPTIONS Secure the RS2 to Tripods, Sliders, Jibs, Car Mounts, and Stabilization Systems via 14-20 and 38-16 threads. CONSTANT POWER Operate the RS2 for Longer Durations with Higher Capacity Gold and V-Mount Batteries. EXTRA SECURITY via the Side Holding Bracket which Provides an Additional Point of Contact. COMPATIBILITY Specifically Designed for DJI RS2.
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer - 3028
FOR DJI RS 2RSCSmallRig Sling Grip 3028 is specially designed for DJI RS 2RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..
Tiltaing 15mm LWS Baseplate (Type I for BMPCC 4K/6K or Z CAM) (Tilta Gray) | TA-BSP-15-G
15MM ROD SUPPORT Secure 15mm Rods to your System for Various Accessories. DOVETAIL SUPPORT Slides and Locks onto Tilta Standard Dovetails. UNIVERSAL Supports Quick Release Plates that Connect via 14-20 Threads. CUSTOM DESIGNED for our BMPCC 4K6K, Z-Cam, and Canon R5R6 Camera Cages. LIGHTWEIGHT DURABLE Aluminum and Steel Construction.
Tilta Rosette Extender Arm Compatible with Any ARRI Standard Rosette Connection | Lightweight, Compatible with Side Handles and RS2 Accessories | TGA-REA
EASY TO INSTALL Quickly Mounts to any ARRI Standard Rosette. UNIVERSAL Compatible with any Rosette Connection. MOUNTING POINTS Multiple 14-20 and 38-16 Threads. COMPATIBLE with many RS2 Expansion Accessories. LIGHTWEIGHT DURABLE Made of High Performance Aluminum Alloy.
Tilta Right Side Adapter from NATO Rail to Rosette | Mount Side Handles and Accessories, Compatible with DJI RS2 and RSC2 | TGA-NRA-R
STABILITY Creates Additional Points of Contact for your Gimbal. COMPATIBILITY Custom Designed for DJI RS2 and RSC2. UNIVERSAL Compatible with any Handle that connects via Rosette. SUPPORTS ACCESSORIES Features Cold Shoe and 14-20 Threads. LIGHTWEIGHT DURABLE Made of High Performance Aluminum Alloy.
Tiltaing Adjustable Cold Shoe Accessory Mounting Bracket
Attach a variety of accessories such as a monitor or wireless video transmitter. Bracket attaches to your camera setup via a cold shoe mount and provides an adjustable 14-20 mounting point. Advanced design and engineering from Aluminum Alloy and Stainless Steel, Available in Black.
Best Choice
Best Value
