Top 10 Best Tinysa Ultra

AURSINC is the only seller selling authentic product on the page, verified on tinysa.org, please kindly know. 2023 UPGRADED NEW TINYSA ULTRALatest hardware version V0.4.5.1. developed by Hugen, 4in touch screen with 480320 pixels resolution, Tinysa ULTRA spectrum analyzer owns a larger measurement range from 100kHz to 5.3GHz, new ESD protection function, built-in 32Gb micro SD card for data transfer and storage, Linear power supply to avoid switching noise. Frequency RangeTinySA ULTRA measures from 100KHz - 5.3GHz Spectrum Analyzer for 0.1-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz to 850kHz. Color display showing max 450 points providing gapless covering up to the full frequency range. You can fast and accurate execute measurement tests. PC OperationConnected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator. Tinysa-APP transfers data directly to the computer. The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.. Excellent Battery Capacity and LifeThe upgraded tinysa analyzer built-in 3000mah rechargeable battery, with type-C charging cable and LED charging indicator, it can be fully charged within 3 hours, a portable spectrum analyzer for outdoor working. Spectrum Analyzer Signal Generator in ONE When not used as Spectrum Analyzer it can be used as Signal Generator, MFHFVHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz, Built-in calibration signal generator that is used for automatic self test and low inputcalibration. The TinySA ULTRA contains all the components of a conventional heterodyne swept spectrum analyzer. What You Get1x Tinysa ULTRA Spectrum Analyzer 2x 30cm ALSR100 SMA cables 1 x USB Type-C data cable 1x SMA-SMA barrel connector 1x TLanyard and touch plectrum 1x Antenna with SMA connector 1x 32GB MicroSD cardplugged in the host, 1x stylus pen.

2023 Upgraded TinySA UltraThis New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.. Frequency RangeCompared to the tinysa 100kHz to 960MHz, the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.. 2 in 1 Multifunctional Frequency Analyzer Signal GeneratorWhen not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.. PC ControlConnected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.. Ultra-long Battery LifeThe upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.. 200Hz-850kHz RBWThe RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB can not be used not in combination with LNA.. Package List1x Tinysa ULTRA Spectrum Analyzer 2 x30cm ALSR100 SMA cables1 x USB Type-C data cable1 x SMA-SMA barrel connector 1x TLanyard and touch plectrum1 x Antenna with SMA connector.1 x32GB MicroSD cardplugged in the host, 1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration..

2023 New Upgrade Enhanced VersionThis newly upgraded TinySA ultra spectrum analyzer produced by Hugen, equipped with 3000mAh rechargeable lithium battery,can work continuously for more than 8 hours,adopts 4-inch touch display screen,provides clear data images and sensitive operation touch,also have the new ESD protection function,installed the latest V 0.4.5.1 hardware system,and built-in 32Gb micro SD card. Frequency RangeCompared to Tinysa 100kHz to 960MHz,TinySA Ultra has a wider measurement frequency range 100kHz to 5.3GHz,up to 0.1MHz-6GHz in Ultra mode,Switchable resolution band pass filters for both ranges between 200Hz to 850kHz.Color display showing 450 scan points covering up to the low full or high frequency range.Measurement performance is more faster, accurater.. Frequency Analyzer and Signal Generator 2-in-1When not used as a spectrum analyzer,it can be used as a signal generator with a built-in calibration signal generator for automatic self-test and low input calibration.100k-800MHz sine wave output 800MHz-4.4GHz square wave output 4.4GHz-5.4GHz mixing signal output.. PC ControlThis TinySA spectrum analyzer can connect to the PC through USB,realize the USB serial CDC protocol,and can call a large number of commands.built-in Linux driver,after connecting to the Windows computer,the Windows driver will be automatically installed.. Package List1x Tinysa ULTRA Spectrum Analyzer 2 x30cm ALSR100 SMA cables1 x USB Type-C data cable1 x SMA-SMA barrel connector 1x TLanyard and touch plectrum1 x Antenna with SMA connector.1 x32GB MicroSD cardBuilt into the device, 1 x Touchscreen pen..

New TinySA Ultra ModeThe ULTRA Tinysa developed by Hugen can reach an ultra-wide frequency range from 100kHz to 5.3GHz. The 4-inch large screen provides clear data images and sensitive operation touch. It also has a new ESD protection function, installed the latest hardware system V0.4.5.1, professional and stable.. Frequency RangeULTRA tinysa has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz. In Ultra mode, up to 0.1MHz-6GHz. It has 200Hz-850kHz RBW, adjacent signals effectively distinguished when RBW reach 200Hz, meet SSB two-tone test requirements, maximum width 850kHz, RBW implements fast scanning.. Used As Signal GeneratorIt is 2 in 1 device, can be used as Signal Generator. Built-in calibration signal generator that is used for automatic self test and low input calibration. 100k-800MHz sine wave output 800MHz-4.4GHz square wave output 4.4GHz-5.4GHz mixing signal output.. Include 32GB SD Card This ULTRA spectrum analyzer built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage. You won't be bothered by saving data any more, and can take tinysa for use at anywhere and anytime.n 240MHz-960MHz.. 3000mAh Rechargeable Battery PC Control The tinysa analyzer built-in 3000mAh rechargeable batterycan be used for up to 8 hours. Support PC Controlyou can also transfer data to your computer through tinySA-APP connection. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel..

2023 UPGRADED NEW TINYSA ULTRAThis New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, 4in touch screen with 480320 pixels resolution, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card for data transfer and storage, Linear power supply to avoid switching noise. Wide FrequencyCompared to the tinysa 100kHz to 960MHz, the upgraded tinysa ULTRA has 100kHz to 5.3GHz Spectrum Analyzer for 0.1-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz to 850kHz. Color display showing max 450 points providing gapless covering up to the full frequency range. You can fast and accurate execute measurement tests. PC ControlThe TinySA can be connected to the computer through USB, which can transmit data to the computer and synchronize the display screen to the computer. The USB interface implements the Serial over USB CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is buil. 2 in 1 Device When not used as Spectrum Analyzer it can be used as Signal Generator, MFHFVHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz Built-in calibration signal generator that is used for automatic self test and low input calibration. The ultra tinysa contains all the components of a conventional heterodyne swept spectrum analyzer.. What You Get1x Tinysa ULTRA Spectrum Analyzer 2x 30cm ALSR100 SMA cables 1x SMA-SMA barrel connector 1x TLanyard and touch plectrum 1x Antenna with SMA connector 1x 32GB MicroSD cardplugged in the host, 1 x USB Type-C data cable 1x stylus pen.

Display size 4 TFT LCD 480320. Max low input frequency 800MHz, 6GHz in Ultra mode. Resolution filters in 1,3,10 steps from 200Hz to 850kHz. Max output frequency Sinus up to 800MHz, Square wave up to 4.4GHz. output level -104dBm to -16dBm. Ultra mode Level calibrated up to 5.3GHz. Internal LNA gain 20dB up to 4GHz. Displayed points per scan max 450. 0-350MHz scan time 165ms. Shortest zero span time 17ms.

Upgraded Version ESD Protection Diodes Produced by Hugen, tinysa with latest hardware V0.3.1, the displayed version info is ESD protected meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE Due to the old inventory might mix with the new batch, and If you got the old version TinySA and want a new one, you could apply a replacement for it.. Frequency Range Spectrum analyzers like the tinysa use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.. 2 in 1 Device When not used as Spectrum Analyzer it can be used as Signal Generator, MFHFVHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinysa contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range. 4 InputOutput Spec Modes The inputoutput specification of the tinysa is split over the 4 modes Low input mode, High input mode, Low output mode, High output mode. Spectrum Analyzer with two inputs, high quality MFHFVHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. The firmware of the tinySA can be updated by the user, For newest firmware version update, please refer to tinysa.org. PC Control The USB interface implements the Serial over USB CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinysa are available. Both are able to capture the screen of the tinysa.

Frequency Range Tiny Spectrum Analyzer with two inputs, high quality MFHFVHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.. Built-in Calibration Signal GeneratorWhen not used as Spectrum Analyzer it can be used as Signal Generator, MFHFVHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.. Tiny Spectrum analyzers ESD FunctionSwitchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.. PC ControlConnected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.. Package List1x Tiny Spectrum Analyzer 2 x 20cm RF Cable1 x USB Cable1 x SMA Female to Female Connector1x Touchscreen Pen1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link..

Built-in 2-in-1 Calibration Signal GeneratorThis TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MFHFVHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.. Frequency RangeThe tinySA Spectrum Analyzer displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IFHFVHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.. PC ControlTinySA Spectrum Analyzer can be connected to PC through USB and realizes the serial over USB CDC protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.. Portable Spectrum Analyzer ESD Protection FunctionTinySA Spectrum Analyzer is latest version 3.1, new ESD protection function, installed diodes,so that it has more sensitive response performance,efficient anti-static level,better quality,longer service life.Built-in 650mA battery,rechargeable and portable use for at least 2 hours.. Good ServiceTinySA Spectrum Analyzer Package List1x Tiny Spectrum Analyzer,1xBox,2 x 20cm RF Cable,1 x USB-C Cable,1 x SMA Telescopic Antenna,1 x SMA Female to Female Connector,1x Touchscreen Pen,1xTouch screen paddles and lanyard.If you have any questions can contact us, we will sincerely service to your satisfaction,we can provide a full refund service until you are satisfied..

The NanoVNA-SAA-2N developed by Hugen. AURSINC is the only seller selling authentic product, please kindly know. AURSINC provide product technical services and lifetime customer support.. Upgraded Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier. 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specificationsplease refer to below path to get the firmware updated drive. google .comdrivefolders1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj. The SAA-2NNanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2NNanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device. Transmission Mearsure S21 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 -50dB50KHz-1.5GHz, -40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz Flip Display, you can flip the display for your convenience usage. NOTE The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection the device can be controlled by PC via VNA-QT software,supported for Linux, Windows 7, Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files.