Top 10 Best Tripod Head Quick Release

Strong and Sturdy Made of high-quality aluminum alloy with solid construction, 26mm ball diameter is durable and tough enough.. 360 Degree Roating 360 Degree Panoramic Base with 3 twist locks can set your camera at different angle easily.. High Compatibility 14 inch quick shoe plate is suitable for DSLR cameras and camcorders,38 inch screw thread hole is for connecting tripod, monopod, slider and other stands.. Small Portable Weight 0.68 lbs310.5g Ball diameter 26mm Height3.14''80mm Max loading17.6 lbs8kgthe plate size length 1.9 inch48mm, width 1.57 inch40mm. Strong Stability The ball head has a strong locking force, it equipped with a spirit level, can make the camera in a balanced state easily..

Super Quick Release and Setup DesignQuick Release Plate originally created by ULANZI allows you to release and set up between camerasmartphonetripodmonopodstabilizerslider quickly instead of screwing. The QR Plate allows you to switch between upright mode and underslung mode in a second. Absolutely Safe and SecureThe quick release system is made of two parts, 14 thread base and 14 screw plate, connected by the slide lock, when quick release your cam, the 14 screw plate is on camera so that you can mount it back quickly.. Universal 14 Thread MountAdopting 14 thread mount, it is not only an accessory exclusive to . It can be applied in monopod and monitor to realize quick setup.. Compact and PortableSmall and Lightweight, 40mm24.5mm, only 50g. Reliable QualityTripod quick release mount is made of Aluminum, sturdy and durable Maximum load 50kg, Secure and Safe Rubber pad, anti-skip..

STRONG AND WELL MADE The 200PL-14 tripod quick release plate is made of aluminum alloy material and is processed by precise numerical control, and the surface is covered with a waterproof and anti-rust coating, no rust and no fading with good durability, it is solid but not too heavy.. EXCELLENT COMPATIBILITY The quick release plate for manfrotto is compatible with MFTO tripod head with RC2 Rapid Connect System, including 322RC2, 468MGRC2, XPRO, 498RC2, 496RC2, 494RC2, MH804-3W, 468MGRC2, 234RC, 700RC2, and more .. QUICK INSTALL With standard 14 inch quick-release screw on the bottom can help you install faster, and allows you to release and set up between cameratripodmonopod quickly.. ANTI-SLIP RUBBER PAD DESIGN the quick release plates for tripod has special anti-slip rubber pads, which can enhance the buffer force between the camera and the tripod, prevent slipping, and achieve perfect installation, and protect the camera from scratches.. WHAT YOU WILL GET You will get 2 pieces of 200pl-14 quick release plate with 14-20 screw..

Compact Size This 323 RC2 quick release plate can be easily assembled and disassembled, it compatible with Manfrotto 200PL-14, suitable for 496RC, 498RC2, 804RC2. There are 38'' screw holes on the bottom, which can be connected with 14'' to 38'' nuts and other devices. With 14'' screw and rotating handle on the bottom, the quick release plate can be manually adjusted to connect the camera or flash.. Standard Anti-twist Locking Screw Once quick plate was pushed inside goove, finger wrench will be locked by a spring equipment , and also we can lock finger wrench with a hasp again.. Material This 323 RC2 quick release plate is made of high quality aluminum alloy material, very strong and durable, can serve you for long time.. loading capacity This 323 RC2 quick max loading is 6.61lb, it equipped with a bouncing locking system and a cut-off valve, the pantilt base makes a more stable and securer connection with the camera.. Package includes clamp adapter base1, quick release plate1, 14'' to 38'' screw adapter1. Weight 0.30lb, size 2.55in3.14in1.29in..

Patenet CLAW quick release design and creative cold shoe design--ULANZI patent design offers camera Super Quick Release Mount instead of screwing, also offers vlog microphone mount solution.. Slide lock, safe and secure--Slide lock to avoid damage of mistouch.. Available for CLAW system--Quick release top cap mount could connect CLAW series products, swtich easily and quickly.. 20KG bearing load--Metal CNC processing supports up to 20KG weights.. 14 to 38 Screw Adapter and a 38 bottom screw thread--You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing..

UNI Safety Payload means your gear is safer than ever. We updated how we measure payload for this product. Content on this page may differ from that on the box you receive detail here is correct. LIGHTWEIGHT AND STRONG It weighs only 0.52 kg, but can hold up to 15 kg of equipment thanks to its magnesium composition. For high-level performance. MAXIMUM PRECISION The levelling bubble and the triple locking system maintain the selected framing with very high precision. SAFE The triple block system makes this head particularly safe and also eliminates annoying shocks or vibrations due to clicks. COMBINABLE This head mounts Manfrotto's hugely popular 200 PL plate, which can be used with a wide range of other accessories.

professional plate enables quick and easy transfer among your camera and tripod. Save your time and energy, lessen the potential abrasion to the bottom screw thread of your camera.. Solid built by aluminum alloy, longer longevity compared to those made of plastic.. Double lock lever deliver ensurance and safety for your camera in case accidental fall off.. No more restriction Flat bottom enables tripod deck of any diameter.. Up to FOUR bubble lever help you better perceive your position more accurately.

360 Degree Swivel Equipped with 3 knobs for adjustment, you are able to set your camera at different angle. Comes with 38'' Bottom Screw Thread You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing. 14 Arca Type QR Plate Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position. With Fine Tuning Damping to protect your device from sudden plunge while doing versatile angle shooting. The base with index marking to indicate more precise control. Note Tripod head Only Camera and tripod are not included.

ArcaSwiss Quick Release Plate- Arca Swiss standard quick release plate, wide compatibility. There have limited screw to prevent the camera from falling. If you remove the limit screw, we reserve a place for you to save it to prevent loss.. 360 Degree Swivel ULANZI Ball Head Weights Only 119g, but provides 10KG22lbs Loading Capacity. ULANZI Ball Head Equips with 2 U-shaped slots for HorizontalVerticalSide Adjustment, Set Your Camera at Any Angle.. 360Rotatable Patent Cold Shoe Design- This Ball Head is our patented design, which perfectly solves the problem that other ball head on the market cannot install the camera and microphone at the same time. The cold shoe is 360 rotatable, adjust your best angle for your micrphone or light.. All Metal, 32.5mm Diameter, 14 Interface - 1.All Metal CNC Machining, 10kg load hard core ballhead, bearing most cameras. 32.5mm diameter designed, compatible most tripods with 14 Interface on the market.. More Stable- Large Area of Anti-Skid Silicone to Protect Your Device from PlungIing. 360 Adjustable Bottom Adjustable Twist Handle..

Unblock, move, position and lock your camera with one hand in one position. Revolutionary grip handle design with ball lock lever. Friction control wheel regulates power of the blocking mechanism to match the weight of your camera and lens. Load capacity of 11 pounds 5.5 pound capacity when in the vertical position. And Two ZAYKIR Quick Release Plates for the RC2 Rapid Connect Adapter.

Premium Fluid Drag Pan Head Exceptionally robust, this professional fluid drag pan head with built in damping and balancing system is made of premium aluminum alloy that can withstand harsh outdoor environments and offer a maximum load capacity of 17.6lb 8kg perfect for taking sharp images and smooth videos. Quick and Easy Modes Switching The fluid head has two QR modes, compatible with DJI RS2 RS3 RS3 PRO gimbal and Manfrotto 501PL 504PL quick release plates respectively. Compared to the traditional slide in structure, you can press the quick release plate directly from the top of the fluid head and lock it in 1s, as well as quickly release the plate via the side release button, more efficient and convenient to switch between tripod and gimbal shooting. Smooth Panoramic Movement The pan base with 360 scale allows you to capture spectacular panoramic images with fluidity and precision. Two Rosette mounts allow you to install the drag handle on both sides and pan the fluid head with either hand. Additionally, a handy bubble level helps you keep the level straight all the time, and the telescopic handle is easy to use and store Example Breathable leather lining. Easy Safe Angle Adjustment With -7090 counterbalanced tilt adjustment, this tripod head lets you photograph at any angle, whether its low angle, overhead, vertical, or horizontal. Once you find the perfect position, tighten the locking knob to secure the tripod head in place. Universal Mounting Threads The 14 and 38 top mounting screws are available for a variety of camcorders, DSLR cameras, mirrorless cameras, cinema cameras, and telescopes. The 38 thread and a 38 to 14 thread adapter on the bottom can be attached to a tripod with a 75mm bowl base, monopod and camera slider. A hex key stored under the head tightens screws for secure camera mounting.

Compact and Portable Measuring only 2.9174mm in height, this compact fluid head is lightweight 10.93oz310g and has a 1.4637mm diameter base. Including all knobs, the entire tripod fluid head boasts an all-metal design, with a textured feel and is more durable.. 360 Panoramic Rotation -55to 90 Tilting The fluid head provides smooth movements and fixed friction damping. Equipped with the aluminum alloy tilt locking knob, pan locking knob, and the handle, you can easily rotate the head 360 or tilt it from -55 to 90. Perfect for multiple angles photography.. Quick Release Plate with 14 Screw The quick release plate compatible with Arca Swiss is easy to install and remove. Attach the plate to your camera and quickly mount it on a tripod if needed. Equipped with an larger area of non slip rubber pad and two fall prevention screws on either side to ensure your equipment is mounted securely.. Detachable Handle Use the included L shape Hex key to detach and install the handle for left hand or right hand operating. And it is magnetically attached to the fluid head for easy removal.. Wide Compatibility Compatible with digital SLR cameras, mirrorless cameras, compact video cameras, and more. The maximum load capacity of the fluid head is 6.6lb3kg..