Top 10 Best Vortex Optics Strikefire Ii Red Dot Sight

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.. Fits Vortex Venom Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Also Fits Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XDM, XDS Pistol. Does not fit 5.25 XDM competition series. It is design to for Springfield Non-OSPNon Optics Ready XDXDSXDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.. Fit Ade RD3-006AHuracan, RD3-006BCobra, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.. There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.. Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement..

We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

The Strikefire II RedGreen Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions. Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance. An offset cantilever mount is provided allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail. With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery..

The Strikefire II RedGreen Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions.. Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.. An offset cantilever mount is provided allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.. With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary..

The updated SPARC features rugged construction thats still compact, with a lightweight form-factor. The 2 MOA dot is as easy as point and shoot - its quick to acquire in close-quarters, but fine enough for pin-point accuracy at extended ranges.. With up to 700 hours of battery life on the highest setting, 50, 000 hour on its lowest, and night-vision compatibility at the lowest two settings, the SPARC red dot will keep working in a variety of conditions.. Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid target acquisition. 12 illumination settings allows shooters to change the dot intensity to the situation at hand.. Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. A unique, integrated base with multi-height mount system allows for either absolute co-witness or lower 13 co-witness mounting on rifle platforms.. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance in all environments. Rugged contruction of single piece chasis keeps the sight compact and lightweight while still withstanding recoil and impact..

Reduce objective lens glare and reflection on any threaded StrikeFire red dot scope with this compact, anti-reflection device ARD.. In addition to reducing reflection, the threaded ARD protects the len from scratches and damage.. Reduces glare and reflection.

The Viper Red Dot Sight has a super low-profile making it perfect for use with cut-out slides. 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze.. The Viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy to access and adjust.. The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.. Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The 2-7x32 Crossfire II Rim fire riflescope is one of many configurations in the Crossfire II line. The V-Plex reticle is a popular all-purpose hunting reticle intended for a variety of hunting applications.. With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing.. Anti-reflective, fully multi-coated lenses provide bright and clear views for the user.. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fog proof performance..

The hinged flip cap optic cover protects your optic from dirt, dust, and debris.. Snap the cover over the objective end of your optic.. Included components flip cap. Package Weight 0.023 kilograms.

The VMX-3T Magnifier and Flip Mount combo adds a 3x magnification to your rifle's red dot sight. Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.. The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. Eye Relief-2.2 inches. Field of View-38.2 feet100 yards. The VMX-3T does not require any special sight-in. The dot centering screws can be used to help center your red dot image in the VMX-3T's field of view.. The magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses. Allows for lower 13 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight. Field of View 38.2 feet100 yards.

TACTICON IS A COMBAT VETERAN OWNED COMPANY STURDIEST AND MOST DEPENDABLE RED DOT MAGNIFIER ON AMAZON - Incredibly fast target acquisition with 2.5 inches of eye relief. Incredibly easy to center the dot in the lens.. INCLUDED FLIP-TO-SIDE MOUNT WITH OPTIONAL SHIM - We've engineered this flip-to-side picatinny rail mount to allow you to shoot either 1X or 3X magnification by simply pushing the magnifier to the side. A 3mm shim is included to increase the vertical height of the magnifier to match the elevation of almost any red dot optic.. 3X CRYSTAL CLEAR MAGNIFICATION - We offer 2.5 inches of eye relief with a focus adjustment on every red dot magnifier. Each lens is coated for anti-glare and the glass is sourced from Germany.. WORKS WITH ALL RED DOT SIGHTS This magnifier was engineered to be cross-compatible with all brands of red dot optics such as EO Tech, Sight Mark, Aimpoint, Holosun, etc. However, we engineered this to work absolutely perfectly with all of our Tacticon branded optics.. LIFETIME WARRANTY AND 100 SATISFACTION GUARANTEE A no hassle 100 satisfaction guarantee with every magnifier and a lifetime warranty included with your purchase. We're a real USA company with real humans answering phones to answer your questions and honor warranty claims.

The VMX-3T Magnifier and Flip Mount combo adds a 3x magnification to your rifle's red dot sight. Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.. The lenses are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. The VMX-3T gives you a generous 3.25 inches of eye relief with a 38.2 foot field of view at 100 yards.. The VMX-3T does not require any special sight-in. The dot centering screws can be used to help center your red dot image in the VMX-3T's field of view.. The magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.. Allows for lower 13 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight. Vortex Optics hat included, hat color may vary..