Top 10 Best Vortex Venom Riser

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.. Fits Vortex Venom Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Also Fits Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red Dot Sights.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Designed exclusively to fit Holosun 407k507k and any red dot with the same footprint.. Compatible with Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. Compatible with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Designed exclusively to fit Holosun 407k507k and any red dot with the same footprint.. Compatible with Shield RMSCRMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWAScrew provided for ADE, Shield, Sig and Holosun. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as JPOINT4, Swampfox Sentine, CT1550, Riton X3 Tactix MPRD. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Trijicon RMRSRO, Holosun 407c507c, ADE RD3-006009012011013015019023.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMRSRO type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. This is a PICATINNY rail mount. The red dot optic MUST equipped with a PICATINNY BASE in order to attach to this riser mount.. Some of the red dots comes with picatinny plate with the red dot purchase, such as Vortex Venom and Burris Fastfire. This Picanny riser will fit the red dot factory provided original pictainny plate.. Some of the red dots do NOT come with picatinny plate with the red dot purchase, such as holosun 407k. User need to purchase the picatinny plate separately in order to attach to this riser mount.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

this handy mount quickly attaches the venom red dot to your rifle while ensuring the correct lower 13 co-witness sight height.. the positive lock, one-handed operation makes it incredibly simple to use.. type iii hard-anodized machined aluminum construction keeps the package lightweight, tough, and durable.. Sport type Hunting.

For direct mounting of DocterNoblex standard red dots to Picatinny mounting platforms. Available in either VenomDocter or RMR standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot.. Available in three different heights, measured from the base of the red dot to the base of the mount - Low Profile 1.4 inch, Medium Profile 1.5 inch, and High Profile 1.6 inch - providing precise positioning for your preferred setup. Precision machined from 6061 grade aluminum with lightening cuts to shave off excess weight. All Monstrum products come with a lifetime guarantee.

ABSOLUTE COWITNESS - Best for using Micro Red Dots on Modern Sporting Platforms - Also compatible with Vortex Venom and Burris Fastfire Red Dot Sights. CANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition. LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there. INSIDE THE BOX - Includes Allen wrench for tightening the riser to a picatinny rail. LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right..

The Venom 5-25x56 First Focal Plane MOA riflescope is built for long-range and competition with a 5-25x mag range built into a 34mm tube for a massive amount of turret travel 85 MOA max elevationwindage.. XD Optical System delivers impressive resolution, edge-to-edge sharpness and greatly reduces chromatic abberation. Fully multi-coated lenses provide superior light transmission for exceptional clarity and low-light performance.. The RevStop Zero System offers an easy to set, fast and reliable return to zero. Side knob parallax adjust allows quick and easy parallax adjustments with range numbers visible while in the shooting position.. EBR-7C reticle ensures subtensions are accurate throughout the mag range making it easy to measure and range targets.The fast focus eyepiece allows for easy reticle focusing while the included throw lever allows for fast transitions between magnifications. Nitrogen purged and o-ring sealed providing water and fogproof performance. Armortek coating protects the lenses from scratches and oil. The one-piece, aircraft grade aluminum, 34mm tube is shockproof, shrugging off recoil and other impacts..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

For 45 degree offset mounting of a micro red dot sight to your picatinny mounting platform. Available for Docter footprint, RMR footprint, 407k507kRMSc, T1T2, or picatinny footprint pattern red dots. Not compatible with other red dot footprint patterns. Please check our compatibility guide to confirm fit with your micro red dot.. Red dot mount attaches directly to your red dot base, includes all necessary mounting hardware. Canted design allows for the mounting of a red dot as a secondary sighting system while maintaining use of your primary optic. All Monstrum products are backed by a lifetime guarantee.

The Riser Mount with a quick release lever is designed for mounting the Razor red dot sight onto a flattop style rifle as the primary optic. Provides lower 13 co-witness with the Razor red dot and absolute co-witness with the SPARC red dot.. When used in conjunction with the Picatinny clamp included with the Razor, this mount positions the red dot of the Razor in the lower third of the field of view when co-witnessed with the iron sights.. Features the Auto Lock Lever System with the following advantages doesn't require proprietary tools, can be adjusted with finger or flathead screwdriver, lever can lock to front or rear, and superior clamping surface ensures maximum rail engagement.. The Riser Mount provides a rise .6 inches 15.3mm above the base surface. Weighs 3 ounces. Made with pride in the U.S.A..

The Viper Red Dot Sight has a super low-profile making it perfect for handguns with cut-out slides.. The Viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.. The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.. Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.. Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments..

The AMG UH-1 Gen II is a close-quarters solution built for military and law enforcement shooters, offering an incredibly fast holographic display to conquer any situation, now with four night-vision compatible settings and a dedicated night-vision button.. With the UH-1 Gen II, you get an improved sight picture through the enlarged viewing window, making target acquisition even faster, and easy battery changes with the toolless battery cover, plus a lighter load at just 11 ounces.. The lightning-quick EBR-CQB reticle is designed to dominate in close, and our FHQ technology virtually eliminates stray light emissions for zero forward signature.. An integrated, quick-release mount makes the sight easy to install and puts the optic at lower 13 cowitness height on either Weaver or Picatinny rails. Rugged construction withstands recoil and impact.. Ultra-hard, scratch-resistantant ArmorTek coating protects exterior lenses from scratches, oil and dirt. O-ring seals help to provide waterproof and fogproof performance in the field..

The Ranger 1800 rangefinder is easy to use and features a clean, illuminated display and highly intuitive menu. The Ranger 1800 is capable of ranging up to 1,800 yards.. The primary HCD mode displays an angle compensated distance that is ideal for the majority of hunters and shooters. An advanced LOS mode provides you the option to calculate long distance, high angle shots with increased precision.. A scan feature gives continuous range readings as you pan across a landscape or track a moving target. Three brightness settings allow the display to stay visible in various light conditions.. Fully multi-coated lenses deliver optimal light transmission. Textured rubber armor provides a secure, non-slip grip. Water and fogproof performance keep the system operating in the harshest conditions.. The included neck lanyard and removable utility clip make the Ranger easy to pack and keep handy. Compatible with a tripod adapter, allowing use on a tripod or car window mount..