Top 10 Best Water Heater Expansion Tank

This non-portable water expansion tank is for closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief sett of the relief valve. The carbon steel tank is pre-charged at 12 psi, has a 4.5 gallon volume, and features a durable expansion membrane preventing minimizes loss of the air change and ensures long and trouble-free life for the system. Made of carbon steel with epoxy finish, mounts to supply piping, with 12 inch MNPT system connection and .302-32 inch charging valve connection for on-site charging of the tank. Maximum pressure 60 psi and can be used in residential or commercial hydronic heating systems. Use in tandem with your hot water heater to absorb increased water volume ensuring long and trouble-free life for the system.

Accepts expanded water caused by thermal expansion. Returns water to the system when hot water is used. Prevents the relief valve from going off. Inline thermal expansion tank. Accepts expanded water caused by thermal expansion. Returns water to the system when hot water is used. Prevents dripping faucets, intermittent toilet fill and pressure relief valve discharge. Protects water heater, appliances and fixtures.

Designed for use with residential closed water systems Butyl diaphragm system absorbs the expansion of water volume. Protected pre-charge valve eliminates potential leak path Prevents dangerous pressure build up, protects household appliances and fixtures External baked epoxy-polyester coating provides a durable appliance finish. Exclusive polypropylene liner eliminates internal corrosion MIG welding eliminates interior rough spots and sharp edges Each tank is factory leak tested. 150 psi maximum pressure rating Maximum operating pressure 150 psi. Operating temperature 200F Factory pre-charge 40 psi. Stainless steel 34 in. MIP with hex Shell carbon steel. Connection stainless steel Diaphragm butyl. Color almond cUPC certified NSF 61 compliant.

2 Gallon 12 Female NPT. Custom Wall Brackets Included. Max Liquid Pressure 130 PSI. Pre-Pressurized Air 30 PSI. Applications Used on gas, oil, or electric, direct-fired, residential water heater and water storage tank applications to absorb the increased volume of water created by thermal expansion..

Eliminates the waste of energy and water, thus saving money. Prevents the relief valve from going off. Protects the water heater and plumbing fixtures from premauture failure. Eliminates the waste of energy and water, thus saving money. Prevents a dangerous pressure build-up in the system.

Eliminates the waste of energy and water, thus saving money. Prevents the relief valve from going off. Protects the water heater and Plumbing Fixtures from premauture failure. Prevents a dangerous pressure build-up in the system.

Water thermal expansion tank - 2. 1 Gal. Diaphragm style tank for residential applications. Steel shell protected with polypropylene liner. Pre-charge is field adjustable. Low-lead law compliant.

Stainless steel 34 in. MIP with hex Factory pre-charged at 40 psi.

Protects Your Water Heater Prevents Dangerous Pressure Build up Eliminates Potential Leak Path. Features a Solid Carbon Steel Construction with an Exclusive Polypropylene Liner, MIG Welding, and External Baked Epoxy-Polyester Coating for Superior Performance. Each Tank is Factory Leak Tested and NSF61 Certified. Max Operating Pressure 150 PSI Temperature 210F. Saves Energy and Water.

Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSINSF Std 62. The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water. Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. A high gloss enamel finish protects tank from the elements. Pre-charged to 25psi please refer to product manual for proper pre-charge setting. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSINSF Std 62. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water. Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. A high gloss enamel finish protects tank from the elements. Safety Tanks are installed with a solid bronze saddle on the cold side of the water heater. Safety tanks can be combined for larger volume needs. Backed by a 5-Year Warranty.