Top 10 Best Zilkee Ultra Recovery Converter

Universal USB Hard Drive Adapter FEMORO sata and ide to usb 3.0 adapter supports 2.53.5 HDDSSD, 2.53.5 IDE, 5.25 DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously.. 5Gbps High Speed Transfer IDE to usb adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, data transfer is super simple and easy, backward compatible with USB 2.0 USB 1.1. External hdd hard drive reader support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux, etc. The actual transmission speed subjects to the setting of the device connected .. Protective Design The hard drive adapter kit design LED indicator light shows Power and activity status. OnOff power Switch for Hard drives protection. For 3.5 IDE drivers and old SATA HDD, you need to connect 12V2A power adapter and 4-pin power cable provided. NOTE Please make sure onoff switch is off before connecting to hdd,incorrect connection may cause damage to your hard drive or electrical shock. Please turn on the switch on ide adapter in the last step.. OTG Adapter This ide hard drive reader comes with a usb c adapter, the USB-C to USB adapter that plugs into the USB C port to match your laptop and is not limited by the computer model. If you want to use a single 3.5 old ide hard drive, you will need to set the jumper to slave before turning on the disk. Note For jumper settings, please refer to your hard drive manufacturer's documentation.. 12 Months Warranty When you get the Hard Drive Reader Include usb cable1, usb c adapter1, 12V2A power adapter1, 4-pin power cable1, manual1, you will enjoy 12 months of after-sales. If you have any suggestions for our products, welcome to contact our professional and friendly team..

Universal SATA IDE Hard Drive Adapter Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. the USB to ide SATA adapter Support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed Performance up to 5Gbps With an external hard drive adapter, youre only able to use one drive at a time. Fortunately, this means that you can get the same high performance youd expect. it supports a data transfer rate of up to 5 Gbps, supports UASP. which is 70 Faster than traditional USB 3.0 and 40 reduction in required processor resources, Backward compatible with USB 2.0 1.1. Broad Compatibility You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required. Huge Capacity Supportive Designed to be lightweight and compact. hard drive recovery converter supports a hard drive capacity of Up to 6TB capacity. a enables access to 2 drives simultaneously, Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turn on the disk. Additional Functions Plug and play hard drive reader support hot swap onoff switch for HDD protection. Led light shows power and activity status. comes with a 12V 2A power supply, you can power larger form-factor SATA drives or IDE drives and likely others. for IDE drives, you have to use the 4-pin power cable adapter to a plugin.

Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1.. Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Plug and play Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status.. What we offer USB 3.0 to IDESATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..

Universal Hard Drive Recovery Converter- Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVDCD-ROM, CDDVD-RW Optical Drive, you can easily connect your hard drives through a USB port as an additional external hard drive to read backup data, operate formatting hard drives, and transfer files. SuperSpeed Transfer up to 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1. supports UASP. which is 70 Faster than traditional USB 3.0 and a 40 reduction in required processor resources. 6TBHuge Capacity Supportive Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. external hard drive reader has a SATA III connector and two IDE connectors 40-pin and 44-pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk. Wide Compatibility Hard drive to USB adapter support hot-swapping. universally compatible with Windows 10 8.1 8 7VistaXP, Mac OS 9 10, Linux work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. When connecting two IDE hard drives, please set the master drive and slave drive based. Additional Functions Plug and play support hot swap onoff switch for HDD protection. Led light shows power and activity status, Included 12V 2A power cable is for providing a stable electricity supply. The 4-pin Molex connector is specifically to power a 12-volt IDE drive when connected. and also Comes with a USB C to USB Adapter, which perfectly matches a MacBook ProMacBook AirChromebookother laptops with a USB Type-C port.

Supported HDDSSDFIDECO IDE and SATA adapter is compatible with 2.53.5 SATAIDE hard drives. It can support the connection of 3 hard drives simultaneously one 2.5 IDE, one 3.5 IDE, one 2.53.5 SATA.. Compatible SystemFIDECO hard drive reader is widely compatible with Windows, Mac OS, and Linux. Just plug and play No driver or software is needed. Maximum 5Gbps Super SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. It can be also backward compatible with USB 2.01.1. Data transfer has never been so much easier and faster.. Easy Set-upSimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. Note For 3.5 IDE HDD, you need to connect the 4-pin power cable.. Warm NoteFor new hard drive, please go to Disk Management to initialize it first, and then your hard drive can be recognized. If 2.5 and 3.5 IDE hard drives are connected simultaneously, you need to set jumper. The default master is 2.5 IDE hard drive, so you need to set jumper for 3.5 IDE hard drive and set it to slave..

Universal IDE Hard Drive AdapterDual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowed to operate three hard disk drives simultaneously.. Stable Power SupplyIncluded 12V 2A power cable. 4PIN Power Cable is designed for 3.5 IDE drive.. SuperSpeed USB 3.0Data transfer rates up to 5Gbps, backward compatible with USB 2.01.1. Support Windows XPVista7810 and Mac OS.. Driver FreePlug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. What We OfferSATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

Universal Hard Drive Adapter SATA IDE to USB adapter allows connect your SATA IDE device to computer as an external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. This is a perfect tool to duplicate, copy, backup, or transfer large amounts of data from one drive to another.. Transfer Rate up to 5Gbps SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected .. Wide Compatibility Hard drive to USB adapter support Operate Systems Support Windows XPVista7 88.110, Mac OS 10 or higher, Linux. Compact body design, Support Plug, and play hot swap, OnOff power Switch for Hard drives protection.. Support Hard Drives Capacity up to 6TB Hard drive adapter has a SATA III connector and two IDE connectors 40pin and 44pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk.. Included 12V 2A Power Supply USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5 IDE drive LED light shows power and activity status..

Universal IDE SATA to USB 3.0 Adapter Hard drive reader support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed up to 5Gbps IDE to USB adapter supports a 5Gbps high-speed transfer rate up to 10x as fast as USB 2.0, which is 70 Faster than traditional USB 3.0 and 80 reduction in required processor resources, Backward compatible with USB 2.0 1.1.. Broad Compatibility External hard drive to usb adapter support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux, etc. Support devises PS4Xbox, Plug Play, No Drivers Needed NDN for multiple OS. Huge Capacity Supportive Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and activity status.OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turning on the disk. Comes with Power Supply OTG Adapter The 2 Amp 12 Volt power supply is helpful to be sure you've got enough power for mechanical motors of 3.5 spinning and 5.25 optical drives.4 pin Molex power for a 3.5 IDE drive, USB-C to USB adapter can be plugged into a USB C port to match your laptop.

Multiple Drive Compatibility The hard drive reader can be used with both SATA and IDE hard drives, and can support multiple types of drives such as 2.5-inch and 3.5-inch SATA or IDE HDDs, CD-ROMs, CD-RWs, DVDs, and DVD-RWs. It can support the simultaneous connection of 2 HDDs for retrieving old files, backup, cloning, and upgrading for a speedy transfer. One-Touch Backup Function No computer is needed Hard drive recovery converter can support offline clones. making the backup process easier and more convenient than ever before. Just press the CLONE button for 3 seconds until the first blue light 25 flashes. You can operate offline clones only in 2 combinations IDE SourceSATA2 Target SATA1 SourceSATA2 Target. Capacity requirement SATA2 Target IDESATA1 Source. 5Gbps High-Speed Data Transfer A SATA IDE to USB 3.0 adapter is designed to offer high-speed data transfer between a SATA or IDE hard disk drive HDD and a device with a USB 3.0 port. The adapter typically supports data transfer speeds of up to 5Gbps.. Easy to Use This hard drive transfer kit is easy to use, you simply plug your SATA or IDE HDD into the adapter and plug the adapter into your device's USB 3.0 port. The adapter comes with a 12V 2A power adapter to provide the necessary power to run the 3.5 drives. the adapter is compatible with SATA drives up to 6 TB. System Compatibility You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required, Warm NoteFor new HDDSSD, please go to Disk Management to initialize it first, and then your HDDSSD can be recognized..

Universal USB to SATAIDE Adapter Supports 2.53.5 SATA HDD and SSD, 2.53.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVDRW Optical Drive,two IDE connector Plus one SATA III connector.. Works with up to 3 HDDs This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors one 2.5 and one 3.5. It allows users to operate 2 HDDs One IDE and One SATA simultaneously. Its compatible with 2.53.5 IDESATA hard drives.. High Speed Transfer Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.01.1.. Support Systems Windows 11XPVista781032bit and 64bit Mac OS 10. X.. Additional Functions Plug and play support hot swap onoff switch for HDD protection. Led light shows power and activity status..